The following introduction to the sub-silo seam: what are the types of silo seams in the yard is quite good, by reading the following article, you can have a more in-depth understanding of this.
First, the types of sub-warehouse seams:
1. Asphalt silo joint: Asphalt is used to fill the silo joint, which is usually used for the separation of roads and parking lots, and has good water resistance and durability.
2.Rubber bin joint: The rubber material is used to fill the bin joint, which is suitable for outdoor and indoor places, and has good elasticity and waterproof performance.
3.Silicone bin joints: Silicone filled silo joints are mainly used for the joints of the exterior wall and the ground of buildings, which can effectively waterproof and resist aging.
Second, the laying method of the sub-warehouse seam:
1. Clean up the silo joints: first clean up the debris at the silo joints to ensure that the surface is dry and tidy.
2.Choose the right filling material: Choose the right filling material, such as asphalt, rubber or silicone, according to the actual situation.
3.Filling: Fill the selected filling material evenly into the bin seam to ensure that the filling is full and flat.
4.Trim the edges: Use a tool to tidy up the edges around the bin joints so that they are connected to the surrounding panels or walls.
5.Surface treatment: Surface treatment is applied to the filler material to ensure that the surface is flat and smooth.
Third, the requirements of the sub-silo seam:
1. Compressive resistance: The filling material of the sub-silo joint needs to have good compressive resistance and be able to withstand the pressure of the surrounding environment.
2.Durability: The filling material of the sub-bin joint should have good aging and wear resistance, and can maintain a good use effect for a long time.
3.Waterproofness: The waterproof performance of the filling material of the sub-bin joint should be good, which can effectively prevent moisture from penetrating into the inside of the sub-bin joint.
4.Aesthetics: The color and texture of the filling material should be coordinated with the surrounding buildings or sites to make the overall effect more aesthetically pleasing.
The selection, laying and requirements of the sub-silo joint need to be carried out according to the actual situation to ensure the use effect and aesthetics of the sub-silo joint. Hopefully, you will find the above helpful.