Portable printers are exported to EU countries and need to apply for CE certification. In the EU market, the "CE" mark is a mandatory certification mark, whether it is a product produced by an enterprise within the European Union, or a product produced in other countries, if it wants to circulate freely in the EU market, it must be affixed with the "CE" mark to indicate that the product meets the basic requirements of the EU "New Approach to Technology Harmonization and Standardization" directive. This is a mandatory requirement for products under EU law. Therefore, it is essential to export portable printers to the EU CE certification.
Portable printer CE certification testing items.
CE-LVD Test Items: Electrically Induced Injuries, Electrically Induced Fires, Injuries Caused by Hazardous Substances, Mechanically Induced Injuries, Thermal Burn Injuries, Normal Working Conditions Tests, Abnormal Working Conditions Tests and Single Fault Conditions Tests, Test Conditions for Devices Containing Audio Amplifiers, Equipment Signs, Instructions and Indicative Safety Guards, Components, Overvoltage Categories, Disconnecting Devices, Measurement of Creepage Distances and Clearances, Safety Protections Against the Ingress of Conductive Materials, Circuits that are scheduled to be interconnected to the building's wiring, heat and flame resistance tests, mechanical strength tests, and confirmation of accessible parts.
CE-EMC test items: harmonic current, voltage change, voltage fluctuation and flicker, electrostatic discharge immunity, electrical fast transient pulse immunity, surge immunity, voltage sag, short-term interruption immunity, power frequency magnetic field immunity test.
Information is required for CE certification of portable printers.
1.2 3 test samples;
2.circuit schematic;
3.Product manuals or manuals;
4.Application form (provided by our company**).
5.Parts list (BOM);
6.PCB diagram (front and back).
Portable printer CE certification process.
1.Project application: submit an application for CE certification to the testing agency;
2.Data preparation: According to the requirements of CE certification, the enterprise prepares relevant certification documents and materials;
3.Product testing: the company will send the samples to the testing laboratory for product testing;
4.Preparation of reports: certification engineers prepare reports based on qualified test data;
5.Submit for review: The engineer will review the complete report;
6.Issuance of certificates: After the report is audited, a CE certification certificate will be issued.