Shenzhen packaging material brother professional answer: how to eliminate residual glue after green high temperature tape is shielded by electroplating and baking paint?
Green high-temperature tape is a vital material used to shield areas that do not need to be covered during the electroplating process. However, with the continuous development of the process, the problem of adhesive residue has gradually become prominent. When faced with the problem of adhesive residue, we need to find a solution.
In order to eliminate adhesive residues, it is necessary to first do a good job in the selection and use of adhesive tapes. The use of high-quality green high-temperature tape can effectively reduce the occurrence of adhesive residue. In addition, it is necessary to pay attention to the angle and strength of the tape during use to ensure that it is completely sealed on the surface of the workpiece to avoid bubbles and voids.
Secondly, timely cleaning and replacement of the tape is also key to preventing adhesive residue. Remove the tape immediately after baking and thoroughly clean any remaining adhesive using a suitable detergent and tool. At the same time, replace the tape regularly to avoid aging and hardening of the tape caused by long-term use, and increasing the possibility of adhesive residue.
In addition, careful operation and inspection are also effective measures to prevent adhesive residues. During the tape application process, focus on making sure that each piece of tape fits in place to avoid situations where it is not covered in place. When removing the tape, it is necessary to remove it slowly to avoid pulling too quickly and leaving it on the surface of the workpiece. Check whether there is any residual adhesive on the surface of the workpiece, and if so, deal with it in time to avoid affecting the subsequent process production.
In general, eliminating the problem of adhesive residue requires a variety of measures and meticulous operations. Through the selection of high-quality materials, timely cleaning and replacement and careful operation inspection, the occurrence of residual glue can be effectively prevented and the smooth progress of the electroplating baking paint process can be ensured. Only by continuously improving the process and strengthening the operation specifications can we better solve the problem of residual glue and improve production efficiency and product quality.