In fact, about handmade leather goods, some people pursue delicacy, and some people enjoy roughness, all of which are their own style, each with their own love.
However, there is still a standard for judging whether the sutures are good or bad, such as whether the sutures are double or single waves, at least straight. There is no oil on the edge banding and upper edges, and it is cut directly with a knife, which is almost meaningless after all.
Well, without further ado, let's take a look at the process of making this hairdresser scissor bag.
This hairdresser scissors bag is relatively simple on the whole (but it looks good to make), and there are fewer steps, that is, the pattern making is troublesome, and the overall version is finally determined by repeated drawing with white cardboard, and then the required leather is cut on the leather according to the cardboard version.
This time, I used Badalassi Cralo vegetable tanned leather from Tuscany, Italy. Because it is all naturally grown leather, it is inevitable that there will be scars on the leather, so when cutting the leather, it is necessary to avoid the scars and pick out the part that is as perfect as possible.
Although this is wasteful, it can ensure that the finished product is more perfect. It's actually a disease.
Cut four pieces of leather and use them to make a pocket for the scissors.
After heating with a borderer, draw decorative lines along the four sides of the leather surface, just like the decorative lines of the card slots of a wallet.
There are various models of edge wires, and they are subdivided into 01.2.3.4……etc., just choose according to personal preference.
There are electric heating methods and alcohol lamp heating, each with its own advantages and disadvantages.
After the decorative line is drawn, it is time to seal the edge. What I want to say about the edge sealing is that you don't need to seal it shiny, but at least the surface must be smooth, otherwise don't seal it at all.
Fold the leather in half and paste it, then cut the edges, four small pockets.
Then sew the small pocket on the leather surface, you can see that I cut it separately, because the leather is thicker, on the one hand, it will not be crooked, and on the other hand, it will not make the top layer of the leather surface too large and affect the appearance.
The appearance of the combination of one layer, one by one, staggered high and low.
The second layer was also stitched up.
In order to install the snap button, here I choose the brass snap button imported from Italy Prym, don't look at a small button, the selection should still be particular, is a detail to pay attention to.
Install the snap buttons with professional tools.
The last part of the suture is the suture of the toolkit and the large body, I have a habit, which can be regarded as a disease, that is, as long as it is not too long, I will use a thread to complete.
If the stitch distance is too long, it is not recommended to use one thread to finish, because even if there is wax on the thread, repeated pulling over a long distance will cause wear and tear of the twine, which will affect the strength, of course, the nylon thread will be a little better.
After sewing the thread, you can draw the decorative line, here you can draw your own style of decorative line with different tools according to your own ideas, and then seal the edges.
Leave my logo in an inconspicuous corner
Punch the hole with a punching tool and install the air eye, which is used to secure the belt hook.
Install the hook and you're done.
The selection of pure copper hardware has improved the overall color a lot, and a pair of small bells also shows my attention to detail.
Look at the scissors installed, the small pocket can hold scissors and combs, and other places can put clips.
Unfold 1st floor: Expand 2nd floor:
The whole is unfolded, easy to clean, simple and practical:
The back look:
end --