The C2 self-stop of the induction cooker is usually caused by some specific problems. Here are some common causes and solutions that may cause the induction cooker C2 to self-stop.
Overheating protection: Induction cookers will generate heat during use, in order to prevent overheating from causing damage to the equipment or safety issues, most induction cooktops are equipped with overheating protection mechanisms. When the temperature of the induction cooker reaches the set safety threshold, the C2 fault code will be automatically triggered and the work will be stopped. The solution is to wait for the induction cooker to cool down and then restart, or contact the manufacturer or professional maintenance personnel for inspection and repair.
Power supply issues: Insufficient or unstable power supply** connected to the induction cooker may also cause the C2 to self-stop. Make sure the cooktop is properly connected to an electrical outlet and check the power cord for damage or poor contact. If there is a real problem with the power supply**, it is recommended to contact a professional electrician or replace the power outlet.
Function settings: Some cooktops may have specific function settings, such as scheduled cooking functions, timer settings, etc. Incorrect function settings or settings that are beyond the capabilities of the induction cooker can also cause the C2 to self-stop. Please read the instruction manual of the induction cooker carefully or contact the manufacturer for the correct function settings and operation methods.
Faulty circuit board: A faulty or damaged circuit board of the induction cooker may also cause the C2 to stop itself. This can be due to long-term use, voltage fluctuations, or other factors. If the problem cannot be resolved by rebooting, it is recommended to contact the manufacturer or professional repairer to inspect, repair or replace the circuit board.
Other faults: In addition to the above common problems, other problems such as faulty sensors, damaged solenoid coils, or incompatible kitchenware can also cause C2 to self-stop. In this case, it is best to contact a professional repairer for inspection and repair.