LYGW-881 series 500 high temperature oven is suitable for precision component heating, metal and steel parts tempering, steel parts heat treatment, alloy parts preheating, special Teflon spraying and curing sintering, hardware high temperature tempering, etc. Yinbang high-temperature oven is composed of chamber, heating system, electrical control system, air supply system, protection system, etc.; The special stainless steel plate in the furnace has no joints or welds, which greatly reduces the coefficient of thermal expansion and contraction, prolongs the service life of the high-temperature oven, and ensures the temperature uniformity in the furnace; The air duct in the box adopts a double circulation system, which is composed of stainless steel multi-wing centrifugal wind wheel and circulating air duct to improve the uniformity inside the box; The production process is mature, the structure is reasonable, the temperature control in the furnace is uniform, the operation is convenient, and the later maintenance and replacement are more convenient.
lygw-881Series 500High Temperature Oven-Advantages:
1.It has a wide range of applications, can dry all kinds of materials, and is a general drying equipment;
2.Most of the hot air circulates in the box, which has high thermal efficiency and saves energy;
3.Using the effect of forced ventilation, the box is equipped with an adjustable air distribution plate, and the material is dried evenly;
4.The temperature application range is large, according to user requirements, it can reach room temperature to 650;
5.The whole machine has low noise, balanced operation, automatic temperature control, and easy installation and maintenance.
6.Studio size and configuration can be customized.
lygw-881Series 500High Temperature Oven-Case Introduction:
Studio size: height 1500mm, width 1200mm, depth 1200mm A variety of sizes can be customized according to requirements.
Studio Material: SUS304 Stainless Steel Plate 20mm thickness; It can be matched according to requirements and working conditions.
Studio tiers: tiered carts, or load-bearing pallets.
Exterior wall material: cold steel plate, surface re-dry paint.
Operating temperature: room temperature 500 can be adjusted arbitrarily.
Temperature control accuracy: plus or minus 1
Temperature control mode: PID double digital display intelligent temperature control instrument, button setting, setting value and actual temperature LED digital display.
Power supply voltage: 380V (three-phase four-wire), 50Hz
Heating equipment: stainless steel electric heating pipe; Long service life.
Heating power: 32kw
Air supply device: long-axis high-temperature oven motor and oven multi-wing wind wheel.
Timer device: 1 minute 999 hours constant temperature timing, preset baking time, when the time is up, it will automatically cut off the heating and beep alarm.
Factory accessories: customized according to customer requirements or products.
Options: 1, trolleys and trays; 2. Temperature control fitting device; 3.Three-color light alarm 3, the foot of the box can be replaced with a mobile universal wheel.
Other specifications: Oven and function of the oven (oven drying oven) can be customized according to the actual needs of users
lygw-881Series 500High Temperature Oven-Precautions for use:
1.The LYGW Series 500 High Temperature Oven should work indoors and be installed smoothly.
2.The power input should be equipped with a special pre-on-off switch, and a good ground wire should be connected.
3.The power supply, voltage, and power wiring must be checked before it can be powered on.
4.When newly purchased and used or shelved for a long time, it should be baked at a low temperature for 80-100 hours for two hours before starting to raise the temperature, so as to facilitate moisture leakage, enhance insulation performance and prolong the life of porcelain.
5.The thermal element probe of the instrument temperature control should be inserted into the working room from the temperature measurement hole of the left line, and should not be inserted from the center hole of the air valve on the top of the box, so as not to affect the use.
6.When this drying oven is used for the first time, it should be observed frequently to avoid overheating and damaging the workpiece and causing losses.
7.If the heat habit is slightly large, a group of heaters can be turned off to reduce the heating power and prevent overtemperature caused by excessive inertia.
8.Bringing in baking items: Do not touch the thermostat that reaches into the studio to prevent damage to the thermostat and cause it to malfunction.
9.This box does not indicate "explosion-proof oven" in the case of do not bake explosive, flammable and volatile items to prevent danger.
10.In case of failure, please ask a professional electrician for maintenance.