Basement plugging, cable trench underwater plugging, pool tunnel plugging, Haixi construction technology
Basement plugging, cable trench underwater plugging, and pool tunnel plugging are common plugging tasks in construction engineering, which require extensive experience and expertise from plugging engineers. This article will divide the solutions and implementation steps of these three types of plugging tasks. First of all, let's take a solution to plug leaks in the basement. The key to plugging basement leaks is to find the source of the leak, which often requires a thorough inspection of the basement structure. Once a leak is found, engineers can use the grouting plugging method, which involves drilling holes around the leak point and then injecting a special waterproofing material. The grouting material spreads and solidifies in the cracks, creating a barrier that effectively stops water from leaking. In addition, larger cracks or broken areas may need to be repaired with a waterproofing sheet or waterproof coating.
Next is the underwater plugging of the cable trench. Since cable communication is often located underwater, the plugging work needs to be carried out in the water, which undoubtedly increases the difficulty of the work. Engineers first need to clean up debris and silt from the cable trench and then find the leak. Small leaks can be repaired with a fast-curing underwater plugging material. For larger leaking areas, it may be necessary to install a temporary cofferdam to isolate the leaking area, and then plug the leak within the cofferdam.
Finally, there is the plugging of the pool tunnel. The difficulty of plugging the leakage of the pool tunnel is that it is long and narrow and difficult to operate. Engineers usually use professional plugging equipment, such as plugging guns, grouting machines, etc., to plug leaks. First, the engineer will carry out a thorough inspection of the pool tunnel to find all the leaks. Then, using a plugging gun or grout, the waterproofing material is injected into the cracked or broken area. For larger leaks, multiple grouts may be required to ensure waterproofing.
In general, basement plugging, cable trench underwater plugging, and pool tunnel plugging all require engineers to have a wealth of experience and expertise. The right solutions and implementation steps will not only effectively address water leaks, but also ensure the safety and longevity of the building. Therefore, it is very important to choose an experienced professional engineer when carrying out these plugging tasks.
Qinghai, Xining City, Haidong City, Delingha City, Golmud City, Yushu City.
First, let's talk about basement plugging. The basement is prone to leakage due to the pressure of groundwater for a long time. The key to basement leakage plugging is to find the leakage point and effectively plug it. Plugging engineers usually use specialized detection equipment to locate leaks, and then plug them by grouting, filling, or applying waterproofing materials. Grouting is a common method of plugging leaks by injecting a special waterproof material into the leak point, so that the material forms a barrier around the leak point, thereby preventing the infiltration of groundwater.
Next is the underwater plugging of the cable trench. Cable trench is an important part of the power system, but due to long-term water erosion, the waterproof layer of the cable trench is easily damaged, resulting in water seeping into the inside of the cable trench. Underwater plugging of cable trenches requires leak plugging engineers to carry out operations underwater, so engineers are required to have diving skills and waterproof equipment. During the plugging process, engineers usually use special waterproof materials to repair the damaged waterproof layer, and also clean the inside of the cable trench to ensure that there is no debris and water accumulation that affects the plugging effect. Underwater leak plugging of cable trench is a complex and delicate project, which requires engineers not only to have professional technical knowledge, but also to have rich practical experience and excellent adaptability. In such an environment, every detail can make or break a leak, so engineers must pay full attention and not be careless.
Wearing wetsuits, carrying oxygen cylinders and carrying professional plugging tools, the engineers dived into the deep cable trench. Every breath they take, every movement, needs to be precisely controlled, because under the water, any misstep can lead to serious consequences.
The engineers first carry out a thorough inspection of the cable trench to identify all possible leaks. They then use a special waterproofing material to repair the broken waterproofing layer. These materials have excellent water resistance and adhesion, forming a strong barrier against water intrusion in humid environments.
At the same time, the engineers will also clean the inside of the cable trench to ensure that there is no debris and water accumulation that affects the plugging effect. They will use professional cleaning tools to remove sediment, garbage and other debris in the cable trench one by one to ensure that the inside of the cable trench is clean and dry.
During the plugging process, engineers are constantly monitoring and adjusting to ensure that the plugging effect is optimal. They will use professional testing instruments to closely monitor the plugging area, and once a leak is found, it will be dealt with immediately to ensure that the waterproof performance of the cable trench is comprehensively improved.
Although the underwater plugging work of the cable trench is arduous, the engineers are always able to overcome all difficulties and complete this important task with their professional skills and firm faith. Their hard work not only ensures the normal operation of the power system, but also provides a stable and reliable power guarantee for our daily life.
Finally, there is the plugging of the pool tunnel. The pool tunnel is an important facility in water conservancy engineering, but due to long-term erosion and erosion by water, the tunnel wall is prone to cracks and leakage. Plugging of pool tunnels requires plugging engineers to work in a limited space, so engineers are required to have a high level of skill and patience. During the plugging process, the engineer will first clean and polish the tunnel wall, then fill and seal the cracks with professional waterproofing materials, and finally conduct a comprehensive inspection and testing to ensure that the tunnel no longer leaks.
In addition to the above three plugging tasks, there are some other plugging tasks that also need attention. For example, leak plugging of basement walls and floors, waterproofing of roofs and walls, etc. These tasks require the plugging engineer to analyze and judge according to the specific situation, and use the appropriate plugging method and materials to ensure that the plugging effect is optimal.
When carrying out the task of plugging leaks, plugging engineers also need to pay attention to some safety matters. For example, wear protective gear to avoid injury or poisoning; It is necessary to strictly abide by the operating procedures to ensure the safety and reliability of the operation process; Waste and wastewater should be disposed of in a timely manner to avoid pollution to the environment. In addition, plugging engineers also need to pay attention to the following points when carrying out leak plugging tasks.
First of all, they need to have a good understanding of the work area. This includes understanding the geography of the work area, climatic conditions, and possible risks. With this information, they can better plan their work and choose the most suitable plugging methods and equipment.
Secondly, the plugging engineer needs to be on high alert and keep an eye on the condition of the work area. Particular care is required when handling high-pressure, high-temperature or toxic substances. They should conduct regular safety inspections to ensure that equipment and tools are in good working order to prevent accidents.
Thirdly, the plugging engineer needs to have a good team spirit. They may need to work closely with other engineers, technicians, and rescuers when carrying out leak plugging tasks. Therefore, they should have good communication and coordination skills to ensure smooth cooperation between teams.
Finally, the plugging engineer also needs to clean and disinfect the work area after completing the task. They should ensure that all waste and wastewater are properly disposed of to prevent pollution to the environment. At the same time, they also need to summarize and reflect on the work process in order to better cope with various challenges in their future work.
In short, when carrying out the task of plugging leaks, the plugging engineer not only needs to master professional skills and knowledge, but also needs to pay attention to various safety matters. Only then can they ensure the success of their tasks while also protecting themselves and others.
In short, basement plugging, cable trench underwater plugging and pool tunnel plugging are common plugging tasks in construction engineering, which require plugging engineers to have rich experience and professional knowledge. When carrying out the task of plugging leaks, engineers need to analyze and judge according to the specific situation, adopt appropriate plugging methods and materials, and also need to pay attention to safety matters to ensure that the operation process is safe and reliable. Only in this way can we ensure the best plugging effect and provide a strong guarantee for the safety and stability of the construction project.