Pneumatic chuck Boschert P-type, this excellent automatic chuck design, uses compressed air as the power source for easy opening and closing of the chuck. The P-shaped chuck has a variety of features, not only with pneumatic switch function, but also with the choice of foot or flange installation to adapt to the needs of different equipment. The VT wear parts in the chuck can be quickly replaced, which greatly improves work efficiency. What's more worth mentioning is that the chuck is equipped with a proximity sensor, which can accurately sense the opening, closing and loading position of the chuck, providing a strong guarantee for automated production.
The P-chuck shows many advantages in practical applications. It is easy to operate, and only compressed air is required to open and close the chuck, without the need for complex mechanical operations. The sensor is equipped to enable the chuck to be fully automatic in the automatic production line, which greatly improves the production efficiency. At the same time, the chuck is designed with a rotary lock when opened to ensure work safety. In addition, the mechanical locking function effectively prevents the chuck from being accidentally opened during the working process, which escorts the production safety.
In terms of technical conditions, P-type chucks are divided into two types, P40 and P50, which are suitable for equipment of different specifications. The P40 chuck has a maximum beam weight of 1600 kg, a maximum torque of 350 Nm and a wear part size of 40 mm. The P50 chuck, on the other hand, has a greater load carrying capacity, a maximum beam weight of 2,800 kg, a maximum torque of 1,100 Nm and a wear part size of 50 mm. In addition, the square-sized reduction P-chucks P40 and P50 are also very good and are capable of supporting 1200 kg with a maximum beam weight of 30 mm and 1400 kg with a maximum beam weight of 35 mm, with a maximum torque of 250 Nm and 400 Nm respectively.