The primary effect plate filter is a device in the air purification system, and its main function is to pretreat the air entering the purification system to remove large particles of dust, microorganisms and other impurities. The installation of the primary effect plate air filter is very critical, which is not only related to the filtration effect, but also affects the operation stability of the whole system.
1.Preparation before installation.
Before installing the initial effect plate air filter, you need to understand the relevant technical parameters and working principles to determine the equipment model that is suitable for you. At the same time, check that the equipment is intact and cleaned. During installation, it is also necessary to ensure that there are adequate lighting and ventilation conditions for easy observation and operation.
2.Device positioning.
First of all, it is necessary to choose the appropriate fixing method according to the size and weight of the equipment, such as wall mounting, hanger or support frame. When positioning, it is necessary to pay attention to keeping the equipment level and avoiding tilting or skewing, so as not to affect the working efficiency and service life of the equipment.
3.Connect the pipes.
After the equipment positioning is complete, the equipment needs to be connected to the air duct. Normally, there will be an air outlet at one end of the air duct and a suction port at the other end, both of which need to correspond to the air inlet and outlet of the equipment to ensure that the gas can pass through the equipment smoothly.
4.Check the tightness.
After connecting the pipes, it is necessary to check the tightness between the equipment and the air duct to prevent air leakage. If any imperfection is found, the sealing material should be adjusted or replaced in time to ensure the normal operation of the equipment.
5.Test runs.
After the device is installed, a test run is required to confirm whether the device is working properly. During the test, pay attention to the inlet and outlet airflow of the device, as well as whether there are any abnormal sounds or other problems. If a problem is found, stop the operation of the device in time, find the cause and fix it.
In general, the installation process of the primary effect plate filter needs to be careful and careful to ensure the proper operation of the equipment and the filtration effect. During the installation process, it is necessary to pay attention to the positioning of the equipment, pipe connection, tightness and test operation to ensure the efficiency and service life of the equipment.