254SMO stainless steel has good corrosion resistance and high temperature strength, and the following is a general introduction to its heat treatment characteristics and mechanical properties:
Heat Treatment Characteristics:
1.Solution Treatment: 254SMO stainless steel is heated to a temperature range of 1050-1150°C and kept for a period of time, usually 30 minutes to 1 hour. Solution treatment helps to evenly dissolve solute elements in the alloy, improving the toughness and machinability of the material.
2.Rapid Quenching: The solution-treated 254SMO stainless steel is rapidly cooled to room temperature. Rapid cooling reduces the formation of precipitated phases, which increases the strength and hardness of the material.
Mechanical properties: 1Yield strength: The yield strength of 254SMO stainless steel is typically between 280-350 MPa, depending on the heat treatment conditions and the state of the material.
2.Tensile Strength: The tensile strength of 254SMO stainless steel is typically between 650-850 MPa, depending on the heat treatment conditions and the condition of the material.
3.Elongation: The elongation of 254SMO stainless steel is usually between 40-50%, indicating that it has good plasticity and toughness.
4.Hardness: The hardness of 254SMO stainless steel is usually between HB 230-270, depending on the heat treatment conditions and the state of the material.
The spot material size of 254SMO stainless steel round bar can vary according to different merchants and regions. The following are the common 254SMO stainless steel round bar stock material size ranges::
Diameter: 1 mm - 300 mm
Length: generally 3 meters or 6 meters, but also according to customer needs to customize the length of non-standard sizes.
It should be noted that the specific size of the stock material may change depending on the inventory situation of the ** supplier. Therefore, when purchasing 254SMO stainless steel round bars, it is recommended to contact the dealer directly to find out the specific size range and length options available in their stock stock. In addition, it can be customized according to specific project requirements.