1.When the fire host sends out the fire alarm information, one of the personnel on duty determines the alarm position according to the information displayed by the alarm host or the information displayed on the graphic display.
Another officer on duty should immediately bring communication equipment to the scene for verification.
2.If it is determined to be a false alarm, notify the fire control room, and the fire control room personnel on duty shall deal with it according to the fire alarm disposal procedures of the fire control room, make corresponding records and register, and reset the main engine.
3.If it is determined to be a real fire and an initial fire, notify the unit leader and organize volunteer firefighters to extinguish the initial fire.
4.If the fire is out of control:
1) First dial 119 to call the police, and arrange a special person to guide the fire truck to approach the fire.
2) Turn on the fire broadcast to guide the evacuation of personnel in each area.
3) Start the corresponding fire protection facilities according to the situation:
a.All elevators are forced to land on the first floor, and non-fire elevators are powered off.
b.Cut off the non-fire power supply on the upper and lower floors of the fire floor.
c.Activation of fire separation facilities (fire shutters, etc.).
d.Start the fire pump.
e.Start the smoke suppression fan.
f.When activating other fire extinguishing equipment in the building, confirm that these equipment are properly activated and functioning.
5.Monitor the operation of fire-fighting equipment, accept feedback signals, and adjust the working status of equipment in time according to the development of fire.
6.After the fire is handled, the normal working state of each system is restored, and the fire time, location and cause of the fire are recorded.
The above is the experience I share with you, I hope it can help you!