The model number is XLD2-9-0The shearing machine of the 75 uses a horizontal side-mounted deceleration device with a reduction rate of 9 and is equipped with a horsepower of 0The 75kw motor adopts a 4-pole design. The frame number is No. 2 and belongs to the series XLD.
The model number is XLD3-9-2The 2kw hammer mill adopts a cycloidal reducer structure and contains an eccentric bearing bushing with a reduction ratio of 9. The motor power that drives the machine is 22kw, the number of poles of the motor is 4 poles. The frame number is No. 3, which also belongs to the XLD series.
The mixing mixer model XLD4-9-3-4P uses a reduction device with an eccentric bearing sleeve with a reduction ratio of 9. The machine is equipped with an electric motor with a horsepower of 3kw and a motor pole count of 4 poles. The frame number is No. 4, and the series is XLD.
The model number is XLD5-9-7The 5 kW screw pump uses a reduction device with anode beating, and the reduction ratio is 9. The motor that drives this pump has a power of 75kw, the number of poles of the motor is 4 poles. The frame number is No. 5, which also belongs to the XLD series.
The model XLD6-9-15-4P uses a reduction device with left and right shafts and a reduction ratio of 9. The machine is equipped with an electric motor with a horsepower of 15kw and a motor pole count of 4 poles. The frame number is No. 6, and the series is XLD.
The loom model XLD7-9-11KW-4P uses a reduction device with a ductile iron housing with a reduction ratio of 9. The machine is equipped with an electric motor with a horsepower of 11kw and a motor stage of 4 poles. The frame number is No. 7, which also belongs to the XLD series.
The model number is XWY8-9-18The reduction ratio of the 5kw press brake is 9, and its motor power is 185kw, the number of poles of the motor is 4 poles. The frame number is No. 8, and the series is XWY. The meaning of the model is not mentioned yet.
The filter model XLD9-59-11KW has a reduction ratio of 59, a power of 11kW, and a motor pole count of 4 poles. The frame number is No. 9, and the series is XLD. The filter contains a center high foot.
The deceleration factor of the model XLD10-59-30KW is 59, the power is 30kW, and the number of poles of the motor is 4. The frame number is No. 10, and the series is XLD. The crane is equipped with a single speed ratio.
The crane with model XWY11-59-30KW has a speed ratio of 59, a motor horsepower of 30kW, and a motor stage of 4 poles. The frame number is No. 11, and the series is XWY. The crane does not come with a motor interface.
The model number is BLD0-35-1The 1-4p gluing machine uses a horizontal side mount with a reduction factor of 35. The machine is equipped with a horsepower of 11kw motor, motor stage is 4 poles. The frame number is No. 0, and the series is BLD.
The model number is BLD5-35-18The fan cooling equipment of 5 adopts the speed ratio of the shaft sleeve with eccentric bearing, which is 35. The device is equipped with a horsepower of 185kw motor with 4 poles. The frame number is No. 5, and the series is BLD.
The harvester with model BLY6-17-22-4P has a deceleration rate of 17, a power of 22kw, and a motor pole count of 4 poles. The frame number is No. 6, and the series is BLY. The harvester is equipped with a standard motor finished product.
The reducer gearbox of the compressor type BLD7-17-45-4P with direct motor has a reduction ratio of 17. The compressor is equipped with a motor with a power of 45 kW and a motor stage of 4 poles. The frame number is No. 7, and the series is BLD.
The welded pipe machine with model BLD8-17-55KW-4P adopts a planetary reducer structure with a variable frequency motor and a reduction factor of 17. The machine is equipped with an electric motor with a power of 55kw and the number of poles of the motor is 4 poles. The frame number is No. 8, and the series is BLD.
The model number is BLD10-35-1The wood chopper of 1 adopts a cycloidal needle reducer and contains cycloidal wheel accessories, and the reduction ratio is 35. The machine is equipped with a horsepower of 1The 1kw motor has 4 poles. The frame number is No. 10, and the series is BLD.
The model number is BLY11-35-2The reducer of the plaster jetting machine of 2 has a motor, and contains cathode beating, and the deceleration rate is 35. The motor power of the machine is 22kw, the number of poles of the motor is 4 poles. The frame number is No. 11, and the series is BLY.