Cold storage noise is a common problem, usually caused by mechanical noise generated by the operation of cold storage equipment, refrigerant flow sound, and cold storage insulation material damage. In order to solve the problem of high noise in cold storage, the following measures can be taken:
Adjust the operation status of the equipment: check the operation status of the cold storage equipment (such as refrigeration units, water pumps, etc.), if the equipment fails or runs unsmoothly, the operation status of the equipment should be repaired or adjusted in time to reduce the generation of mechanical noise. Large-scale cold storage cost Optimize the refrigeration system: Check the design and installation of the refrigeration system, if the refrigerant flow is not smooth or the pipeline vibration is large, the design and installation of the refrigeration system can be optimized to reduce the refrigerant flow sound and pipeline vibration sound.
Replace the thermal insulation material: If the thermal insulation material of the cold storage is damaged or fails, it will lead to the degradation of the thermal insulation performance of the cold storage and produce noise. The insulation material can be replaced to improve the thermal insulation performance of the cold storage to reduce the heat convection and heat conduction caused by the temperature difference between the inside and outside of the cold storage, thereby reducing the generation of noise.
Increase shock absorption measures: Adding shock absorption measures on cold storage equipment and pipelines, such as installing shock absorbing brackets, shock absorbing seats, etc., can reduce the noise caused by mechanical vibration and pipeline vibration.
Regular maintenance and maintenance: Regular maintenance and maintenance of cold storage equipment can keep the equipment in good condition and normal operation, thereby reducing the noise caused by equipment failure and wear.
To sum up, the solution to the problem of high noise in cold storage can start from adjusting the operating status of the equipment, optimizing the refrigeration system, replacing thermal insulation materials, increasing shock absorption measures, and regular maintenance and maintenance. Corresponding measures need to be taken according to the specific situation to achieve the purpose of reducing the noise of cold storage.