testomat2000crvi**Hexavalent chromium analyzerIt operates according to the photometer analysis principle, which is based on the German industrial standard DIN 38405. The analysis was carried out by the addition of two reagents, and the results of the analysis were displayed after a reaction time of approximately two minutes (net measurement time excluding rinse time). The range of applications is e.g. for the detection and monitoring of wastewater treatment plants in the electroplating sector. Measuring range 0 to 10 mg l hexavalent chromium.
The Testomat2000CRVI Hexavalent Chromium Analyzer acts as a rugged wet chemistry** monitor from 0 to 20 to 1 mg l range monitoredHexavalent chromium (CRVI) content was monitored in the range of 0 mg L. The instrument operates according to the photometer analysis principle, which is based on the German industrial standard DIN 38405. The analysis was carried out by the addition of two reagents, and the results of the analysis were displayed after a reaction time of approximately two minutes (net measurement time excluding rinse time). The range of applications is e.g. for the detection and monitoring of wastewater treatment plants in the electroplating sector. Two individually configurable limit contacts can be used for a wide variety of monitoring and control tasks. The results can be recorded with a dot or line recorder (0 4 to 20 mA) via the optional logger card (electrical interface SK910).
testomat2000crviHexavalent chromium analyzerKey features:
1、testomat2000crviHexavalent chromium analyzerEnables simultaneous determination of WEEE RoHS with rapid qualitative analysis in 100 seconds. Quantitative analysis of 5 elements of ELV (CD, PB, HG, BR, CR).
2. The operation is very simple, as long as you select the control key of the computer interface, you can easily test and obtain the required data, the instrument is a model for manufacturers, which can be competent for large-scale incoming inspection, which is very suitable for production quality control.
3. High sensitivity, equipped with ultra-high sensitivity silicon drift detector (SuperSDD).
4. Low cost, no need to use liquid nitrogen, and no need to destroy the sample. Large sample measuring room: 470mm, 300mm and 100mm can be tested.
5. The design of the product makes this product have lower failure rate, lower maintenance, lower reagent consumption and higher cost performance and accuracy than similar products.
6. The measurement is realized through the liquid level control system superior to the photoelectric quantification, which overcomes the quantitative error caused by the wear of the peristaltic pump tube, realizes the quantification of trace reagents, and greatly reduces the amount of reagents.
7. The instrument adopts imported multi-directional selection valve, and the channels are flexible and diverse, which greatly reduces the maintenance amount and maintenance cost.
8. Peristaltic pump negative pressure suction, there is always an air buffer zone between the reagent and the pump tube, which avoids the corrosion of the pump tube and the corrosion of the peristaltic pump hardware in the case of pump tube rupture;
9. The use of the United States * light source, greatly improve the measurement accuracy and resolution of the instrument;
10、testomat2000crviHexavalent chromium analyzerThe temperature control technology used overcomes the influence of temperature drift and ensures that the reaction conditions of the sample are more in line with the requirements.
11. The reagent pipelines are all transparent hoses made of imported PTFE material, and the diameter of the pipes is greater than 15mm, which reduces the impact of water sample particle clogging on the system measurement;