CAD angles are accurate to 01 method.
In CAD, the accuracy of the angle is an important parameter because it directly affects the quality and accuracy of the design. Sometimes, we need to be precise to 01 degree to ensure the accuracy and consistency of the design. Here's how to get accurate to 0 in CAD1 degree.
First of all, we need to open the CAD software and enter the drawing interface. In the drawing interface, we can see an angle input box. In this input box, we can enter the angle value. However, by default, the input box is only accurate to one decimal place. Therefore, we need to increase the accuracy to 0 with the following steps1 degree.
Step 1: Set the angle units and precision.
Enter the units command on the command line and press Enter to confirm. In the pop-up dialog box, we can see parameters such as "length", "angle" and so on. We need to set the precision of the "angle" to 01 degree. In the drop-down menu after Angle, select the Decimal Degrees option and set the precision to 01。
Step 2: Enter the angle value.
Enter the angle value in the angle input box in the drawing interface. For example, if we want to enter an angle value of 45 degrees, we can enter "45". At this point, CAD will automatically convert this value to 0Accuracy of 1 degree.
Step 3: Adjust how the angle values are displayed.
In the drawing interface, sometimes the angle value may not be displayed in the way we want. For example, sometimes it might show up as "450000" instead of "45". In this case, we can use the following method to adjust how the angle value is displayed.
Enter the lts command on the command line and press Enter to confirm. In the dialog box that pops up, we can see a "Show Format" option. In this option we can choose how we want it to be displayed. For example, we can choose a display such as "Scientific Notation" or "General". Once we have chosen the display we want, click on the "OK" button.
With the above steps, we can get the angle accurate to 0 in CAD1 degree. This method is suitable not only for the input and display of angles, but also for other parameters that need to be accurate to one decimal place. I hope this method can help you better use CAD software for design work.