1. Electricians must undergo safety training and hold an operation certificate before they can take up their posts.
2. It is necessary to master the basic knowledge of safe electricity use and the performance and operation methods of electrical equipment, and be familiar with the safety operation procedures.
3. When measuring and inspecting near live equipment, a safe distance from live equipment must be maintained.
Fourth, use a well-insulated tool for operation and use a well-insulated tool bag for carrying.
5. Before climbing the pole, the firmness of the wooden pole, concrete pole and metal pole must be checkedCheck the integrity of the pole climbing tool;Check that the seat belt used is strong and reliable.
6. When working on live equipment, tools with insulating handles should be used and work on dry insulators.
7. When working close to the live part, it is necessary to use a safety helmet and stand on a dry insulator.
8. The low-voltage household wire should be installed in the firm part of the pole, and it is strictly forbidden to tie it to the lightning cable and the wire insulator.
9. When working with low voltage and electricity, it is necessary to use qualified safety tools and set up special personnel to supervise them.
10. When installing or overhauling live equipment, safety measures such as preventing interphase short circuit and single-phase grounding should be taken.
Ten. 1. During power failure operation, after disconnecting the power switch, the maintenance equipment should be grounded and the switch box door should be locked.
Ten. 2. When someone is found to be electrocuted, the power supply should be quickly cut off or the electrocuted person should be removed from the power supply with an insulator;When the electrocuted person's breathing and heartbeat have not stopped, the electrocuted person should be placed on his or her back, and first aid should be given by artificial respiration or chest extrusion on the spot, and a doctor should be called**.