This is caused by the high temperature of the water, as soon as the temperature is too high, the overheating protection will cut off the steam source, and when the temperature is low and the air supply begins, there will be the said cold and hot. Turn the fire down and the water temperature down to see if it can be solved, or you can turn off the gas valve small, if it doesn't work, you need a booster pump to boost the pressure.
Gas water heater, also known as gas water heater, refers to a gas appliance that uses gas as fuel to transfer heat to cold water flowing through the heat exchanger through combustion heating to achieve the purpose of preparing hot water.
The gas water heater is mainly composed of valve body assembly, main burner, small fire burner, heat exchanger, safety device, etc., and also includes the flue water heater flue and the strong discharge device of the strong exhaust water heater. The valve body assembly controls the working procedure of the entire water heater, which includes water valves, air valves, micro switches and ignitions. When installing a water heater, valves should be installed on the inlet pipe, outlet pipe, and gas pipe.
Energy conservation and emission reduction is the development direction advocated by the state, and products with less energy consumption will be a direction for future development. Solar water heaters and air energy water heaters have a good development momentum as low-energy products. However, due to some limitations of the product itself, the product has certain limitations in meeting the needs of consumers, so comprehensive energy utilization has become another direction for the development of water heaters. As new energy products, solar water heaters and air energy water heaters are showing a strong momentum of development, and the two categories are rapidly expanding the market due to their unique performance, and have a strong response among consumers.
When using the water heater, open the gas valve and inlet valve first. When the outlet valve is opened, the igniter and micro switch control first ignite the small flame and then the main flame. The use of electronic pulse igniter, this kind of igniter is convenient and time-saving, only need to press with a finger, and the safety is high, there will be no safety accidents due to accidental flameout, once the state of flameout, the control system can close the solenoid valve in time, shut off the gas. Some water heaters do not have a small fire, and can directly ignite the main fire. The gas is burned in the combustion chamber, the heat is heated through a heat exchanger, and the hot water flows out of the outlet. Turn off the outlet valve and the water heater stops working.
Water heater recommended.
Sentai constant temperature gas water heater C06 is equipped with an upgraded microcomputer processing chip, which can accurately control the water-gas ratio in real time through high-speed algorithms, quickly achieve constant temperature control, and the antibacterial rate of high-purity oxygen-free copper water tank is as high as 999%, effectively inhibiting Escherichia coli, Staphylococcus aureus and other breeding water quality is cleaner.
The above is my sharing, I hope it can help, if you think Komori writes carefully, useful to you, you may wish to like and pay attention to it, Sentai Electric, enjoy life!