Office aluminum gusset ceiling, do you know?Let's take a look!
1.Springline.
According to the floor elevation level, according to the design elevation, the ceiling elevation line is bounced along the wall, and the center point of the room is found, and along the elevation line of the ceiling, the keel binning position line is drawn on the wall with the center point of the room.
2.Install the main keel boom.
After the elevation level line of the roof and the keel position line are played, the elevation of the lower end of the boom is determined, the pre-processed boom is installed, and the boom is installed on the roof with Pa expansion bolts. The boom is made of round steel, and the spacing of the boom is controlled within the range of 1200mm.
3.Install the main keel.
The main keel is generally C38 light steel keel, and the spacing is controlled within the range of 1200mm. When installing, the hanging parts matched with the main keel are used to connect with the boom.
4.Install the side keel.
According to the ceiling net height requirements, the 25 25mm paint keel is fixed with cement nails around the wall, and the cement nail distance is not more than 300mm.
5.Install the secondary keel.
According to the specifications and dimensions of the aluminum gusset, the secondary keel matched with the plate is installed, and the secondary keel is hung on the main keel through the hanging piece. When the length of the secondary keel needs to be extended by multiple continuations, the secondary keel connector is used to connect the opposite ends while hanging the secondary keel, and is straightened and then fixed.
6.Install the metal plate.
When the aluminum gusset is installed, pull a reference line in the direction of the vertical secondary keel in the middle of the assembly area, align the baseline and install it on both sides. When installing, handle it gently, and you must press both sides of the square plate lightly in the order of the flanging part, and then push it tightly after being stuck into the keel.
What problems should be paid attention to in the decoration design of office corridors?In this issue, Qi Jian Decoration takes everyone to look down.
1.Corridor style.
First of all, the design style of the office space corridor should be consistent with the overall style of the office, and it is important to avoid blindly adding other decorative elements that cause incompatibility with the surrounding corridor, that is, the corridor is unified with the overall style. Otherwise, this will affect the decoration effect of the overall office and give a sense of chaos.
2.Practicability.
Office decoration corridor in the design of the ground, should be dirt-resistant and practical principles, so as to ensure that the daily work is carried out in an orderly and unstable manner, if you choose some too gorgeous decoration products, then it also has a certain impact on the work, do not only consider external factors.
3.Security.
The design of office decoration corridors should focus on the number of safety exits, and should be designed and decorated in accordance with fire protection regulations. At the same time, in the design of the walkway, the evacuation channel is an important factor, in the large space of the office area should be arranged a reasonable pedestrian passage, at the same time, the choice of office decoration materials for the walkway decoration design should be completely in accordance with the requirements of fire protection, the use of fireproof materials.
4.Corporate identity.
No matter which area of the office is decorated, the corporate image needs to be taken into account. If the aisle is very wide, then the wall should have a good plan and use, you can place some corporate culture promotional products, you can also use some classic success stories to encourage everyone's work, if the corridor is long and narrow, you need to consider some extended decorations, can give people a better visual effect.