Technical parameters of HMCXZ cable AC withstand voltage test equipment
1.Rated voltage range of cable AC withstand voltage test equipment: 0-1000kv
2.The rated current range of cable AC withstand voltage test equipment: 0-3000A
3.The output power range of cable AC withstand voltage test equipment: 0-3000kva
4.Frequency range of cable AC withstand voltage test equipment: 50Hz 60Hz
5.Test waveform of cable AC withstand voltage test equipment: sine wave, pulse wave.
6.Control mode of cable AC withstand voltage test equipment: manual control, automatic control.
7.Safety protection of cable AC withstand voltage test equipment: over-voltage protection, over-current protection, short-circuit protection.
8.Temperature range of cable AC withstand voltage test equipment: -10 50
9.Humidity range of cable AC withstand voltage test equipment: 85%RH
10.The appearance size of the cable AC withstand voltage test equipment: according to the specific model.
11.The weight of the cable AC withstand voltage test equipment: according to the specific model.
Precautions for HMCXZ cable AC withstand voltage test equipment
1.Before using cable AC withstand voltage test equipment, it is important to ensure that the power and ground connections of the equipment are well connected to prevent the risk of electric shock or fire.
2.Before conducting the test, it is necessary to check whether the working status and parameter settings of the equipment are correct to ensure the accuracy and safety of the test.
3.During the test, the equipment operating procedures must be strictly followed to ensure the safety of the operator.
4.During the test, it is essential to keep the equipment and the surrounding environment of the test sample dry and clean to prevent leakage or short circuits.
5.During the test, it is essential to avoid overloading or overloading the equipment to prevent damage or accidents.
6.At the end of the test, the power of the equipment must be turned off in time, and the cleaning and maintenance of the equipment must be carried out.
7.In the process of using the equipment, if the equipment is found to be faulty or abnormal, it must be stopped immediately, and troubleshooting and repair must be carried out.