Triangle reef island mould Triangle reef island mould introduction, triangle reef island mould is a mould used to pour artificial triangle reef island, triangle reef island is an artificial cement component used to protect the marine environment, which plays an important role in aquaculture and marine ecological protection, and then I will introduce the structural characteristics, functional advantages and use methods of the mold.
Structural characteristics of the triangular reef island mold: the structure of the mold is also divided into two parts: the inner membrane and the outer mold, the design of the outer mold is very simple, it is a triangular prism structure welded by three steel plates, and the three steel plates are connected into a whole, and there will be a switch that is convenient to disassemble at a certain junction Because the outer mold is the main stress part, it is usually equipped with staggered plate reinforcement for reinforcement. The inner membrane structure is complex, and in addition to the triangular prism structure of the whole, there are windows on each side, which is also based on the design principle of biomimicry, and these windows provide a more realistic environment for fish and other marine life activities.
Functional advantages of the Triangle Reef Island Mold: The Triangle Reef Island mold can quickly pour a large number of artificial reef islands, which are usually transported to the designated sea surface and then released, which can help curb marine pollution and improve the areas with insufficient coral reef coverage, which has a significant contribution to the restoration and protection of the marine ecological environment. These reef islands can also be used in the offshore aquaculture industry, which has an obvious effect on promoting the increase and stability of aquaculture production, and helps to reduce the adverse effects of natural conditions on the aquaculture industry.
The use of the triangle reef island mold: the mold use method is roughly the same as other molds, as long as the mold is assembled, the concrete pouring can be, because the mold has more internal windows, to ensure that the concrete is evenly filled when vibrating, the vibration is not sufficient may lead to the quality of the cement reef island that is poured, after the mold is used, the surface needs to be cleaned, and the protective material should be stored in a low-temperature dry space after spraying the protective material for a long time.