If you want to know about the pool joint floor and wall available, it is recommended that you take a look at the following article to have a more in-depth understanding of it.
For the design principles of the floor wall of the pool compartment joint, there are mainly the following points:
1. Waterproof performance: The design of the floor wall of the pool is the first consideration of waterproof performance. Because the pool is exposed to water for a long time, it is necessary to use materials that are resistant to water and take into account the effects of temperature changes and water pressure. The design should include reasonable structural waterproofing measures and the selection of waterproofing materials.
2.Impermeability: The floor and wall of the pool should have good impermeability to avoid water leakage to the ground or other rooms. When designing, consider the use of sealing material to fill the bin seam to ensure the tightness of the bin seam.
3.Strength and stability: The design of the floor wall of the pool sub-silo joint also needs to consider the structural strength and stability. The materials of the wall and the floor should have sufficient strength to withstand the action of water pressure and external forces to ensure the structural stability of the pool.
4.Safety: Anti-slip and anti-corrosion are safety issues that must be considered in the design of the floor and wall of the pool compartment joint. The selection of materials for walls and floors should have good anti-slip performance to prevent personnel from slipping in slippery conditions. At the same time, the use of anti-corrosion materials can extend the service life of the pool.
Construction method: 1. Preparation: Before construction, a detailed design should be carried out, and the necessary tools and materials should be prepared. Clean up the construction area to ensure that the walls and floors are flat and clean, free of oil and loose objects.
2.Waterproof treatment: First, waterproof treatment is carried out, and waterproof paint or waterproof membrane is used to paint and pave the walls and floors. Apply one primer and then two topcoats to ensure that the coating is uniform and complete.
3.Silo seam treatment: clean the silo seam to remove debris and dust. Then use a sealing material, such as silicone sealant, to fill the bin seam to ensure the tightness of the bin seam.
4.Floor and wall covering: Choose the right floor and wall materials, such as tiles, ceramics or glass tiles, and lay them according to the design requirements. Glue is applied to the floor and walls, and then the bricks are glued one by one according to the design pattern. When tiling, pay attention to the size and uniformity of the brick joints.
5.Cleaning and maintenance: After the construction is completed, the cleaning work should be carried out, the surface should be cleaned, and the excess glue and debris should be removed. Then according to the requirements of the material, the curing is carried out, and the construction area is kept ventilated and dry to ensure the quality of the wall and floor.
The above are the general principles and methods of the design and construction of the floor wall of the pool sub-silo joint, and the specific design and construction process needs to be adjusted and optimized according to the specific situation and requirements. When designing and constructing, it is recommended to consult with professional designers and constructors to ensure the quality and safety of the pool.