During the construction of the anti-collision soft package of the conversation room, it is very important to keep the wall flat. Flat walls not only make the upholstery more aesthetically pleasing, but also improve the soundproofing and comfort of the conversation room. This article will introduce how to achieve the flattening of the anti-collision soft package construction wall of the conversation room.
1. Preliminary preparation.
Before starting the construction of anti-collision soft pack, it is necessary to make sufficient preliminary preparations. First of all, it is necessary to check the flatness of the wall, and for obvious irregularities, it is necessary to deal with them. For example, use putty to fill in the depressions and sandpaper to sand the bumps to make sure the wall is flat. At the same time, it is necessary to ensure that the wall is dry and clean, free of impurities such as oil stains and dust.
2. Measure the size of the wall.
Before construction, it is necessary to measure the size of the wall and customize the anti-collision soft package according to the actual size of the wall. Special attention needs to be paid to the dimensions of corners and special locations when measuring to ensure that the custom-made crash upholstery fits perfectly against the wall.
3. Install anti-collision soft pack.
When installing the crash avoidance pack, it needs to be done step by step in order. First install the large surface, then the corners and special shapes. During installation, care needs to be taken to keep the wall surface flat. For uneven parts, fillers can be used for filling or cutting suitable filler material for filling. At the same time, it is necessary to pay attention to the splicing seams of the anti-collision soft package to ensure that the splicing seams are smooth and beautiful.
Fourth, the details of processing.
Attention to detail is required when installing the anti-collision soft case. For example, there may be small gaps left during the installation process that can be filled with fillers. At the same time, it is necessary to pay attention to the edge treatment of the anti-collision soft bag to ensure that the edge is neat and flat. After installation, sandpaper can be used to sand the surface to make the entire wall look flatter and smoother.
5. Quality inspection.
After the construction of the anti-collision soft package is completed, a quality inspection is required. Check the flatness of the wall, the installation quality of the anti-collision soft pack, and the sound insulation effect. If there is a quality problem, it needs to be dealt with in time to ensure that the anti-collision soft package construction of the entire conversation room meets the requirements.
Sixth, maintenance.
After the construction of the anti-collision soft package in the conversation room is completed, proper maintenance is required. Avoid sharp objects scratching the wall and keep the wall clean and dry. Regularly check the installation of the anti-collision soft bag, and if it is loose or falling off, it needs to be dealt with in time. At the same time, care needs to be taken to avoid long-term direct sunlight to avoid damage to the anti-collision soft bag.
In short, to realize the smoothing of the anti-collision soft package construction wall of the conversation room, it is necessary to make sufficient preliminary preparation, accurate measurement, reasonable installation, attention to detail, strict quality inspection and maintenance. Only in this way can we ensure that the construction quality of the anti-collision soft package of the entire conversation room meets the requirements, and improve the sound insulation effect and comfort of the conversation room.