OneAibo high-frequency electric knifeThere is no reason to show
1.Power failure: There may be a problem with the power supply part of the Aibo high-frequency electric knife, resulting in the equipment not working properly. This can be caused by a broken power cord, a damaged power adapter, or a poor contact with the power connector.
2.Display failure: There may be a problem with the display of Aibo High Frequency Electrosurgical Unit, resulting in the inability to display. This can be caused by damage to the internal circuitry of the display, damage to the display, or poor contact of the connecting cables.
3.Control board failure: There may be a problem with the control board of Aibo high-frequency electric knife, resulting in the equipment not working properly. This may be caused by damage to the internal circuit of the control board, poor contact of the control board interface, or poor contact of the connection cable between the control board and the display.
4.Software failure: There may be a problem with the software of Aibo high-frequency electric knife, which may cause the device to not work properly. This can be caused by something like the software itself being defective or incompatible with the hardware.
IIAibo high-frequency electric knifeThe repair method
1.Power failure repair: First check whether the power cord of Aibo high-frequency electric knife is broken or loose, if so, reconnect it. If not, you'll need to replace the power adapter or power connector.
2.Display Fault Repair: First check if the monitor is powered on, if so, you need to replace the monitor or repair the internal circuitry. If not, you need to check whether the Aibo high-frequency electric knife connection cable is in good contact.
3.Control board fault repair: First check whether the control board is powered on, if so, you need to replace the control board or repair the internal circuit. If not, you need to check whether the interface of the Aibo high-frequency electric knife control board is in good contact or whether the connecting cable is in good contact.
4.Software fault repair: First, check whether the Aibo high-frequency electrosurgical software is the latest version or compatible with the hardware, if so, you need to reinstall or upgrade the software. If not, you need to contact the manufacturer for repair or update.
IIIAibo high-frequency electric knifeExclusion method
1.Troubleshoot power supply: First of all, check whether the power cord of Aibo high-frequency electric knife is connected normally, if it is connected normally, it means that there is no problem with the power part;Then check if the power adapter is working properly, if it does, then there is no problem with the power adapter;Finally, check whether the power interface is in good contact, if the contact is good, it means that there is no problem with the power interface.
2.Troubleshoot the display: First, check whether the Aibo high-frequency electrocutor display is powered on and working normallyThen check that the connecting cables are in good contact;Finally, check whether the internal circuitry of the display is damaged or if the display is damaged.
3.Troubleshoot the control board: first check whether the Aibo high-frequency electrosurgical control board is powered on and working normallyThen check whether the control board interface is in good contact;Finally, check whether the internal circuits of the control board are damaged or whether the connecting cables are in good contact.
4.Troubleshooting software: First, check whether the Aibo high-frequency electrosurgical software is the latest version or compatible with the hardwareThen reinstall or upgrade the software;