Shaanxi Xi'an Gaoling High-tech Zone, Chang'an District, Weiyang District, Caotan Yanliang Xianyang Fengdong Wugong Jingyang Sanyuan plant decoration, new plant decoration design, plant office design and decoration, industrial park plant decoration, plant partition layout, steel structure plant decoration, plant floor construction, industrial plant decoration, plant decoration which is good, plant decoration planning and design, factory decoration, plant decoration precautions, Xi'an Donglang decoration plant decoration, Shaanxi Donglang construction engineering.
With the gradual progress of the work of the enterprise, the call for the settled enterprises to prepare for decoration and production is getting higher and higher, in order to meet the needs of the settled enterprises, we have fully opened the audit and handling of the decoration procedures of the settled enterprises;However, the safety of the plant decoration period is also the top priority of our service center, and next, I will give you a science popularization of important matters that need to be paid attention to in the process of plant decoration!
1. Material selection for plant decoration.
Most of the factories are large in area and do not need much design art, pragmatism is the most important. The choice of materials for decoration is very important, especially for flooring and topping. Among them, there is a problem of wear and tear on the ground, so it is necessary to choose some durable materials. Load-bearing, antistatic, and other factors should be considered. In addition, large enterprises pay special attention to cleanliness, and try to consider as much as possible when decorating and decorating. For example, some mineral wool sound-absorbing panels have the advantages of low cost, low ignition point, simple operation, etc., and are often used on the top of the factory.
2. Ground materials for plant decoration and decoration
The first thing to consider in the decoration of the plant is the ground part. Some high-quality, low-cost decoration materials, such as floor tiles and composite wood floors, can be used as decoration materials for factory floors. Some factories need to bear loads when they are decorated and decorated, so they need to pour concrete on the ground base. There are two types of concrete: commercial concrete and soil concrete. The former is slightly more costly, but the quality is stable;The latter has a lower cost and average quality. Then, other hard stones are laid on top of the concrete base for trimming. In addition, the decoration of the plant should choose anti-static floor or anti-epoxy floor.
3. Partition design for plant decoration.
The partition design is closely related to the layout of the factory. Light steel keel gypsum board partition wall, stainless steel glass partition wall, aluminum-plastic plate tempered glass partition wall, pure tempered glass partition wall can be selected, and the cost of light steel keel gypsum board partition wall is low, which is economical and practical.
4. Reasonable planning space of the plant.
The division of the internal space of the plant is mainly for the operator to make reasonable use of the space according to the actual use requirements. If there are many equipment in the factory, it is not advisable to set up too many partitions and partition walls. Try to divide the area according to the color of the ground or some colored signs, and avoid too many colors, which will not only make the area less obvious, but also make people dizzy. In addition, the plant can be clearly divided into equipment area and office area. When designing this kind of factory, it is necessary to grasp the close integration of data and various spaces, and consider the smoothness between the equipment area and the office area, as well as the interference of dust and noise, so as to facilitate later management.
5. The top design of the plant.
The top of the plant is usually very high, and when decorating the top, a reasonable fire protection, ventilation and air conditioning arrangement should be designed first, especially the hardware facilities necessary for fire fighting. The next step is to determine whether to use a suspended ceiling based on the usage requirements. There are many materials in the ceiling of the factory. If you want to be beautiful, you can use mineral wool sound-absorbing board, gypsum board, aluminum-plastic board and other materials to decorate the top. Or don't do the ceiling, go for it in a modern way, and decorate it locally with some facilities that need to be hidden.
6. Strong current design of the plant.
The electrical equipment of the plant is indeed very important in the process of use, especially in terms of fire protection. The rationality and safety of the design of strong electricity are directly related to the normal operation of the plant and the safety of personnel. Strong current design needs to focus on the following points: wire selection: choose wires that meet national standards to ensure the quality of wires, wire laying: reasonable arrangement of wires, avoid crossing and winding, to ensure the safety of wires, distribution box: install distribution boxes, to ensure that the power is stable, grounding: to ensure that all electrical equipment is well grounded, to prevent electric shock accidents, lighting: according to the needs of the plant, reasonable installation of lighting equipment, safety: pay attention to safe electricity use, to avoid overload and short circuit of electrical equipment. Through reasonable strong current design, it can effectively reduce the fire risk of the plant and ensure the safety of personnel and property. During the design process, it is advisable to consult with a professional electrical engineer or fire protection expert to ensure that the design complies with the relevant fire safety standards and codes.
The content is on the Internet, only for communication and Xi, if there is any infringement, please contact to delete.