Lifting reactors are reactors that are used to carry out various chemical reactions. During use, it is sometimes necessary to adjust the height of the lifting table to suit different experimental needs. The lifting reactor is mainly composed of the kettle body, lifting table, motor and controller. Among them, the lifting table is an important part of the reactor, which is used to place equipment such as experimental samples and heaters. The up and down movement of the lifting table is controlled by the motor and the controller.
Next, we will introduce how to adjust the height of the lifting table of the lifting reactor
1.Turn off the power: Be sure to turn off the power switch of the device before making the height adjustment of the lift table to ensure safe operation.
2.Open the lid: Use the handle to open the lid of the reactor so that the lift table can be observed and operated.
3.Adjust the height of the lift table: According to the needs of the experiment, use a tool such as a handle or wrench to gently rotate the height adjustment nut of the lift table. When rotating the nut, make sure that the force is evenly applied to avoid excessive rotation that causes the lift table to fall off or be damaged.
4.Observe the height of the lifting table: In the process of adjusting the height of the lifting platform, the position of the lifting platform should be constantly observed to ensure that it reaches the required height. If you find that the height of the lift table is not high enough or too high, you can continue to adjust the nut until you are satisfied.
5.Lock the height of the lifting table: When the lifting table reaches the desired height, use the lock nut to secure it in place. When locking the nut, make sure that the force is evenly applied to avoid excessive rotation that may cause the nut to loosen or be damaged.
6.Close the lid: After completing the height adjustment of the lifting table, use the handle to close the lid of the lifting reactor and ensure that the lid is completely sealed.
7.Turn on the power: After confirming that the height of the lifting table is adjusted, turn on the power switch of the device and start the experimental operation.
It should be noted that when adjusting the height of the lifting table, it is necessary to avoid excessive pressure or impact on the lifting table and the reaction kettle, so as not to damage the equipment. In addition, during the experiment, it is necessary to regularly check whether the height of the lifting table has changed, and if there is a change, it should be adjusted in time.