What are the losses of grease equipment during operation?We all know that any machine will have wear and tear when it is running, and grease equipment is no exception, but do you know that the wear and tear of grease equipment is in the first place?How can we reduce this loss?Xia Hua followed the oil engineers of Thai grain and oil machinery to learn together.
In the process of oil refining, there are several links that cause the loss of oil and fat, and it is difficult to avoid, including alkali refining link, deodorization link, dehydration link, the whole link is generally called oil consumption rate, or oil yield, especially the decolorization link in the oil refining stage, the oil consumption rate is higher.
In the process of adsorption and decolorization, activated clay and activated carbon will inevitably absorb part of the oil, and the whole is difficult to avoid, and the fuel consumption rate is relatively large compared with several other links. In order to reduce the fuel consumption rate of grease equipment, the method of mixing activated carbon and clay is generally adopted, because the oil content of activated carbon is higher, so try to calculate accurately when using, too much or too little is not good.
The other is the loss of the deodorization link in the refining stage. On the one hand, the volatilization of odorous substances causes poor quality of grease, and on the other hand, when the grease is airstripped, the grease will splash. This leads to oil loss, but in general it is very small.
The above is all about the detailed introduction of animal fat equipment in operation, if you still want to know about the introduction of oil equipment, welcome to pay attention to learn more.