The method of gluing the edge of the toilet bowl is as follows:
1.Preparation: Make sure the construction site is clean and dry, and have the required tools ready, such as glue guns, rags, gloves, etc. Choose a sealant that matches the color of the toilet rim.
2.Cleaning: Use a clean rag to wipe the rim of the toilet bowl to make sure it is free of water, oil, and other impurities. At the same time, clean the surrounding environment to prevent dust or debris from affecting the adhesion of the glue.
3.Gluing: Apply the sealant evenly to the gaps in the edge of the toilet bowl to ensure that the glue is full and smooth. Do not allow glue to come into contact with ** or clothing to avoid difficult washing.
4.Trowel: Before the glue is dry, use a rag to smooth the glue so that it evenly covers the gap in the edge of the toilet. At the same time, wipe off the excess glue so as not to affect the appearance.
5.Wait for drying: Let the glue dry naturally, generally need to wait for more than 24 hours. During this time, do not allow the glue to come into contact with water or moisture so as not to affect its adhesion effect.
6.Acceptance: Check the effect of gluing to ensure that the sealant is uniform, smooth and free of bubbles. At the same time, check whether there is any missing or unglued place, and make up the glue in time.
Notes:1During operation, keep your hands clean so as not to affect the adhesion of the glue.
2.If the glue is not dry or sticky, it may be a problem with the quality of the glue or improper use. At this time, use should be discontinued immediately and professional advice should be consulted.
3.During the construction process, it is necessary to pay attention to safety and avoid glue splashing on the eyes or **. In case of accidental contact with ** or eyes, rinse immediately with water and consult a doctor for advice.
4.Before using the sealant, you should read the product instructions carefully and follow the instructions for operation. At the same time, attention should be paid to the method of storing the sealant to avoid the influence of adverse conditions such as direct sunlight, high temperature and humidity.
5.After the gluing work is completed, the tool and the remaining sealant should be properly stored for later use. At the same time, attention should be paid to keeping the construction site clean and hygienic.
Toilet