The design of the wardrobe, from the wall punching point, one door to the top, no handle design, laser edge banding, all kinds of knowledge points have been heard countless times, but even so, there are still a lot of cases of overturning, according to this year's experience of rollover, for everyone to summarize the latest pit avoidance strategy.
1. We all know that it is not easy to use, and it is easy to break, but if you want to have a neat effect, then the paint door panel is the best choice. If the door panel is made of PE T material, choose a particularly small door seam and a handle of the same color to achieve better results.
2. Regarding the use of side sealing plates, don't blindly use 18 thick just because others recommend them, the experience is that as long as you don't place an order with a ruler and provide manufacturers with the opportunity to measure finely, then the side sealing plate can be without, but it should be noted that the vertical construction of the wall must be done well, and the premise of minimalist art must be extremely demanding on the foundation construction.
3. The difference between a cabinet of more than 1,000 square meters and a cabinet of more than 2,000 square meters is not the type of plate and **, but the pursuit of details, laser edge banding, milling handle, baking paint, electrostatic powder spraying and other details should be taken into account.
4. In order to achieve the effect of the same color of doors, walls and cabinets. Doors can only be lacquered panels. Take the paint of the wall and wooden door to brush the color card, and send it to the customized factory to make the board and color matching. Note that do not directly use the color card of the paint to adjust, the color card and the actual paint are also different in many cases, and the door must be used as a paint door. Only in this way can the painted wall door end up in a color.
5. The question of how many centimeters should be left between the door door and the top surface of the cabinet door and the top surface. The experience is that the upper sealing plate is five to one centimeter from the top zero point, the lower sealing plate is one to two centimeters from the ground, and the upper and lower gaps together must not exceed three centimeters.
6. If you want to achieve a minimalist style of wardrobes and interior doors, then the embedded baseboard is essential. No baseboard that protrudes from the wall will achieve a perfect closure. If you want to create a true minimalist style, plasterboard all over the wall with built-in baseboards is a must, don't leave anything to chance.
AI assistant creation season