Nowadays, because of the emergence of various industries, the mold temperature machine has been a multi-purpose machine, the mold temperature machine is also known as the mold temperature control machine, the mold thermostat, the medium is generally water or heat transfer oil, the medium is called water temperature machine (water mold temperature machine, water heater, water circulation temperature control machine, etc.), the medium is called oil temperature machine (oil mold temperature machine, oil heater, oil circulation temperature control machine, etc.).
The mold temperature machine uses electric energy, environmental protection and pollution-free, and is well adapted to a variety of industrial tasks, and the mold temperature machine can accelerate the production progress of the enterprise, reduce energy consumption, improve the efficiency of product molding, and inhibit the generation of product defects and defective products. Today, I want to tell you what to pay attention to in the use of the special mold temperature machine for the heat press.
In the use of the special mold temperature machine for the hot press, it is necessary to avoid hidden dangers caused by improper operation. The operating temperature shall not exceed the set temperature;It is necessary to regularly check whether the connections of each pipeline are loose, whether there are signs of oil leakage and oil leakage, and if there is, it should be repaired in timeOil leakage and oil leakage are very dangerous, once the oil temperature machine is found to leak oil, it should be stopped and continued to be used, and the pipeline should be welded until the temperature drops down to prevent the leaking heat transfer oil from combustion.
Pay attention to regularly clean the filter, pipeline, oil tank, and heating pipe of the special mold temperature machine for the hot press. If there are a large number of impurities inside the mold temperature machine, it will definitely affect the heat transfer efficiency and oil quality of the heat transfer oil, and even there is a danger. We should clean it regularly to ensure that the heat transfer oil is clean, and after using the heat transfer oil for a period of time, the heat transfer oil must also be completely replaced.
If you need to shut down, please cool down the temperature 10 minutes before the special mold temperature of the heat press is turned off, and keep it below 70 to shut down, because the surface temperature of the heating tube can be reached, and the heat transfer is not circulating, and it often forms charcoal on the surface of the heating tube, which affects the use of the unit, and the water temperature machine is slightly better, especially the oil temperature machine, long-term improper operation will lead to slower heating speed, and will also produce pungent odor.
Of course, there are many things to pay attention to in the use of the special mold temperature machine for the hot press, only by paying more attention to the use of the special mold temperature machine for the hot press, as long as you pay more attention to the danger at ordinary times, can you bring greater benefits to customers.