OnePower failure
Reason:It can be caused by a loose power plug, a broken power cord, or a damaged power switch.
Workaround:Check whether the power plug is loose, whether the power cord is broken, and whether the power switch is working properly. If there is a problem, replace or repair it in time.
IIHardware failure
Reason:It may be due to the failure of the hardware equipment of the lathe, such as motors, sensors, actuators, etc.
Workaround:Check whether the hardware equipment of the lathe is working normally, such as whether the motor is rotating, whether the sensor feedback is correct, whether the actuator is executed as required, etc. If a problem is found, repair or replace the hardware device in a timely manner.
IIISoftware glitches
Reason:It may be due to a malfunction in the lathe control software, such as a PLC program error, a mismatch in the communication protocol.
Workaround:Check whether the lathe control software is working normally, such as whether the PLC program is running normally, whether the communication protocol is matched, etc. If a problem is found, repair or replace the software in a timely manner.
FourthInsufficient air pressure
Reason:It may be caused by insufficient air pressure or blocked air paths.
Workaround:Check whether the pressure of the air source is normal and whether the air path is unblocked. If there is a problem, adjust the air supply pressure or clean the gas path in time.
FiveOperational errors
Reason:It may be caused by operator misoperation or improper operation.
Workaround:Check whether the operator follows the correct operation steps, such as checking whether the start button is pressed, whether the emergency stop button is reset, etc. If a problem is found, the operation error is corrected in time.
SixSignal is missing
Reason:It can be caused by a faulty sensor or a broken signal line, etc.
Workaround:Check that the sensor is working properly and that the signal cable is well connected. If a problem is found, repair or replace the sensor or signal cable in a timely manner.