An electric blast dryer is a common piece of lab equipment used to heat and dry samples. The following is the use and operation method of the electric blast drying oven:
1. Prepare before use.
1.Turn on the power and check if the power supply is normal;
2.Open the drying oven door and confirm that the sample is placed in the appropriate position
3.Close the drying oven door and adjust the temperature and humidity controllers.
2. Steps.
1.Turn on the power and turn on the power switch
2.Adjust the temperature controller to set the desired temperature
3.Adjust the humidity controller to set the desired humidity
4.Press the heat switch to start heating;
5.When the temperature and humidity reach the set value, the device will automatically stop heating;
6.After waiting for the sample to dry completely, turn off the device.
3. Precautions.
1.During use, keep the equipment tidy and avoid scattering samples
2.Do not place anything on the device that is not related to the experiment;
3.When the equipment is abnormal, it should be stopped immediately and the maintenance personnel should be contacted in time
4.When you are done using it, turn off the power and clean the device.
4. Safety Precautions.
1.Operators must be trained to operate the equipment
2.Lab coats and gloves must be worn during operation to avoid burns;
3.Do not place flammable materials around the device to avoid fire;
4.When the equipment fails, it should be stopped immediately and the maintenance personnel should be contacted in time.
In short, the electric blast dryer is an important piece of laboratory equipment, and the operator must be proficient in its use and operation methods to ensure the accuracy and safety of the experimental results.