DHG series electric constant temperature blast drying oven is a kind of drying equipment widely used in laboratories, industrial and mining enterprises, scientific research units and other fields. In order to ensure the effectiveness and safety of use, the following provides instructions for use and precautions for use.
Directions for use:
1.The device should be placed in a level, well-ventilated place, ensuring that there is enough space around the device to facilitate heat dissipation and maintenance of the device.
2.The power supply of the equipment should meet the requirements and be well grounded to ensure the safe operation of the equipment.
3.When the equipment is used again after the first use or long-term non-use, it should be run at no load first, and then loaded and operated after the equipment reaches the set temperature.
4.When the equipment is loaded and running, the items to be dried should be placed on the turntable or tray of the equipment and kept at an appropriate distance so as not to affect the ventilation and drying effect of the equipment.
5.During the operation of the equipment, the door of the equipment should be kept closed well to avoid heat loss and outside air entering the equipment.
6.The equipment should be regularly maintained and maintained to ensure the normal operation and service life of the equipment.
Precautions for use:
1.During the use of the equipment, attention should be paid to safety to avoid dangerous situations such as electric shock or scalding.
2.When the equipment is used again after not being used for a long time, the equipment should be inspected and debugged to ensure the normal operation and safety of the equipment.
3.During the operation of the equipment, attention should be paid to the operation status and drying effect of the equipment, and if there is any problem, it should be stopped for inspection and contact personnel for maintenance.
4.The equipment should avoid overload operation and overheating, so as not to damage the equipment and shorten the service life.
5.The equipment should avoid contact with corrosive gases and liquids to avoid damage to the equipment and shorten the service life.