Scaffolding is an indispensable temporary facility in construction projects. However, due to various reasons, scaffolding projects often have some common problems, which seriously affect the quality and safety of the project. This paper will make a detailed analysis of the eight common problems of scaffolding engineering, and put forward corresponding improvement strategies.First of all, the erection of the outer frame was not reviewed in accordance with the regulations. This is one of the most common problems in scaffolding engineering. In order to save time and cost, some construction units ignore the audit work of the erection of the outer frame, resulting in a great reduction in the stability and safety of the outer frame. The solution to this problem is to strengthen supervision and ensure that all external erections are rigorously audited.
Secondly, the arrangement of the wall pieces is unreasonable. The wall piece is an important part to ensure the stability of the scaffold, if the arrangement is not reasonable, it will lead to the overall stability of the scaffolding to decline. Therefore, the construction unit should reasonably arrange the connecting wall pieces according to the specific project situation.
Third, the foundation of the frame is not hardened. The hardening treatment of the scaffolding foundation is a key step to ensure the stability of the scaffold, if it is not done well, it will lead to problems in the use of the scaffold. Therefore, the construction unit should be hardened in strict accordance with the provisions during the construction of the frame foundation.
Fourth, there is no sectional acceptance of the erection of the frame. Segmented acceptance can find and solve the problems in the process of erection of the scaffold in time to ensure the quality of the scaffolding. Therefore, the construction unit should regularly carry out sectional acceptance in the process of erection of the frame.
Fifth, the setting of scissor brace and vertical diagonal brace is unreasonable. Scissor brace and vertical diagonal brace are important support structures to ensure the stability of scaffolding, and if the setting is unreasonable, it will affect the stability of scaffolding. Therefore, the construction unit should reasonably set up scissor braces and vertical diagonal braces according to the specific project conditions.
Sixth, the scaffold board and protective fence support are not set. Scaffolding and protective fences are important facilities to protect the safety of workers, and if they are not set up, they will increase the safety risk of workers. Therefore, the construction unit should set up sufficient scaffolding boards and protective fence brackets on the scaffolding.
Seventh, the safety net is not used in accordance with regulations. Safety nets are an important facility to prevent objects from falling and injuring people, and if they are not used in accordance with regulations, they will greatly increase the safety risk. Therefore, the construction unit should use the safety net in strict accordance with the regulations.
Finally, the scaffold board of the working layer is not fully paved, and it is paved firmly. The full and stable laying of the scaffold board on the working floor is an important measure to ensure the safety of workers working at height, and if it is not done, it will increase the safety risk of workers. Therefore, the construction unit should ensure that it is fully paved and paved firmly in the laying process of the scaffold board of the working layer.
In general, the common problems of scaffolding engineering need to be paid close attention to, through strict construction management and standardized operation procedures, in order to effectively avoid the occurrence of these problems and ensure the quality and safety of the project.
December Creation Incentive Program