With the development and progress of society, the construction standards of interrogation rooms are also constantly improving. In the construction of interrogation rooms, anti-collision soft bags are an important component, which can effectively protect the safety of interrogators. This article will introduce the construction standards of anti-collision soft package old houses in the interrogation room, including material selection, construction technology, acceptance criteria and other aspects.
First, the selection of materials.
The anti-collision soft package material of the interrogation room should have the characteristics of flame retardant, anti-collision, environmental protection, etc., which can effectively absorb the impact force, reduce noise, and ensure the personal safety of the interrogators. When selecting materials, high-quality materials that meet relevant national standards should be selected to ensure the service life and safety of the anti-collision soft pack.
Second, the construction process.
1.wall treatment.
Before installing the anti-collision soft package, the wall should be treated to remove dirt, oil stains and other impurities on the wall to ensure the flatness and cleanliness of the wall. For the uneven place of the wall, it should be filled and polished to ensure the installation effect of the anti-collision soft package.
2.Measure the size.
According to the size of the interrogation room and the material specifications of the anti-collision soft pack, the wall surface is measured to determine the size and number of the anti-collision soft pack. At the same time, attention should be paid to the splicing and fixing methods of the anti-collision soft bag to ensure the installation effect and use effect.
3.Install the anti-collision soft case.
According to the measurement results and design requirements, the anti-collision soft package is installed on the wall block by block in order. During the installation process, attention should be paid to adjusting the position and angle of the anti-collision soft pack to ensure the flatness and verticality of the installation. At the same time, attention should be paid to the fixing method of the anti-collision soft bag, and a reliable fixing method should be adopted to prevent the anti-collision soft bag from falling off or displaced.
4.Reshape the corners.
For the corners, doors and windows and other edge areas, they should be trimmed as needed to ensure the installation effect and aesthetics of the anti-collision soft package. When trimming the corners, care should be taken to protect the material of the anti-collision soft pack to avoid damage or scratches.
3. Acceptance criteria.
1.Flatness.
After the installation is completed, the flatness of the anti-collision soft package should be checked to ensure that the surface is smooth, smooth, free of wrinkles, bubbles and other phenomena. For uneven places, they should be adjusted or repaired in time.
2.The splicing is tight.
The splicing of the anti-collision soft bag should be tight, and there should be no gaps or misalignment. A reliable connection method should be used at the splicing place to ensure the stability and firmness of the anti-collision soft pack.
3.The color is consistent.
The color of the anti-collision soft bag in the same area should be the same, and there should be no obvious color difference. For the color inconsistency, the material should be adjusted or replaced in time.
4.Meet the design requirements.
The installed crash protection package should meet the design requirements and meet the functional and safety requirements of the interrogation room. At the same time, attention should be paid to the coordination and aesthetics with the overall decoration style.
Fourth, maintenance.
1.Cleaning and maintenance.
During use, the anti-collision soft bag should be cleaned and maintained regularly to keep the surface clean and tidy. When cleaning, use a soft cloth to wipe the surface, avoid using corrosive detergents or hard objects.
2.Regular check-ups.
The anti-collision soft bag should be inspected regularly, and if it is found that it is worn, damaged or falling off, it should be repaired or replaced in time. At the same time, attention should be paid to check whether the fixing screws and other accessories are loose or fall off, and tighten or replace them in time.
To sum up, the construction standards for anti-collision soft packed old houses in the interrogation room mainly include material selection, construction technology, acceptance standards and maintenance. During the construction process, the construction and acceptance should be carried out in strict accordance with the standards to ensure the safety and functionality of the interrogation room. At the same time, attention should be paid to maintenance during use to prolong the service life of the anti-collision soft bag.