When installing the good wife fingerprint lock, you need to pay attention to the following details:
1.Cut-outs: Installing a fingerprint lock requires re-openings and threading through wires. Always make sure the holes are smooth and thorny, especially for metal doors. If there is a burr, it needs to be smoothed with a file to prevent injury to the wire.
2.Cable: Cable refers to the connection line between the inner and outer panels of the lock to ensure that the power supply and information of the lock can be "communicated" normally. The line must be in the correct position, otherwise it will affect the expansion and contraction of the lock body and the hook, and even cause damage to the wire, making the lock unusable.
3.Lock cylinder: The lock cylinder is a standard part of the lock. If the lock cylinder is not installed properly, it may cause the lock to be used unsmoothly. This usually happens during the installation of a fully automatic fingerprint lock.
4.Hinge Adjustment & Fixation: Hinge adjustment is crucial. If it is not adjusted and fixed, the door may hang down during subsequent use, resulting in the door opening and closing not smooth, or even the lock hole is misplaced, and the door cannot be locked.
The steps to change the password of the good wife fingerprint lock are as follows:
1.Wake button: Touch the button area with the palm of your hand to wake up the button.
2.Enter the administrator system: Press (*) to enter the management 123456 password (or enter your administrator password and fingerprint) as prompted, and press ( ) to confirm to enter the administrator system.
3.Change password: In the administrator system, press 1 to enter the administrator settings, press 2 to modify the administrator, enter the number to be modified, enter the new password, and press ( ) to confirm.
Please note that the specific operation and setting should be carried out according to the voice or LCD screen prompts of the good wife fingerprint lock.