Installing multiple systems at the same time on a single PXE server requires a few techniques and steps. Here's a basic guide to help you with this task:
First of all, you need to prepare a PXE server, which is usually a computer running the PXE bootloader. You can use any operating system that supports PXE booting, such as Windows or Linux.
Next, you need to prepare installation images for multiple operating systems. These files can usually be downloaded from the operating system vendor. For example, you can install image files for Windows 7, Windows 10, Linux, etc.
Once you have the PXE server and install the image file, you can start configuring the PXE server to support multiple operating systems. Here are some steps:
1.Configure the PXE server: You need to configure the PXE server to accept PXE boot requests from client computers. This typically involves setting up network configurations such as the server's IP address, subnet mask, and gateway.
2.Install the PXE bootloader: Install the PXE bootloader, such as GRUB or SystemRescueCD, on the PXE server. These programs will allow you to select the operating system installation image file to load during the pxe boot process.
3.Configure PXE boot menu: Create a PXE boot menu using the PXE bootloader. This menu will allow you to select the operating system installation image file to load during the pxe boot process. You can add as many operating system options as you want, and specify the appropriate installation image file path for each option.
4.Prepare the installation image file: Place the installation image file for each operating system in the appropriate location on the PXE server. Make sure that the path and name of each file are correct so that you can select them in the PXE boot menu.
5.Test Configuration: Once you've finished configuring the PXE server, you can use a client computer to test it. By setting the client computer to boot from the PXE server, you should be able to see the PXE boot menu and select the operating system installation image file to load.
Once you've completed the steps above, you're ready to start installing multiple operating systems on your PXE server at the same time. Each operating system will be installed using its own installation image file, and you can select the operating system you want to load from the PXE boot menu.
It is important to note that installing multiple operating systems at the same time may involve some complex technical issues, such as sharing files and resources, network configuration, etc. Therefore, if you are not familiar with these techniques, it is advisable to do adequate research and testing before doing so.