Sewage pipe junction dislocation, cracking, leakage, plugging, underground pipeline leakage, plugging
For the problem of dislocation cracking and leakage at the junction of sewage pipes and leakage and plugging of underground pipelines, you can try the following methods:
1.Confirm the water source: Turn off the water source, close the main inlet valve, and release water from part of the leakage area.
2.Find the leak: Observe and confirm the specific location of the leak, and check and confirm with a tool such as a shovel.
3.Remove the leakage: Clean the area around the crack and gently sand it with sandpaper to ensure that the surface is smooth and free of impurities.
4.Mix waterproof plugging treasure: Modulate waterproof plugging treasure according to the proportion and cement sand, and fill the prepared material into the crack to make the gap fully filled.
5.Squeeze the material and smooth it with the material: Use a trowel or other tool to compact and smooth the material to ensure that the surface is smooth and free of bumps and cracks.
6.Curing: After completing the above steps, wait for the waterproof plugging treasure to fully solidify, which generally takes more than 24 hours.
7.Check again: After completing the above steps, you can perform a closed water test to confirm whether there is another water leak.
If the above methods do not solve the problem, it is recommended to seek the help of the waterproof plugging construction team or manufacturer, who can use technology and materials to repair it. At the same time, the problem of leakage of underground pipes can also be solved by replacing pipes or using other waterproof materials.
Please note that when dealing with such issues, it is important to pay attention to safety and follow the guidance of personnel to avoid unnecessary troubles and losses.
Sewage pipe junction dislocation, cracking, leakage, plugging, underground pipeline leakage, plugging