Plate bending machine is a common metal processing equipment, which is mainly used to crimp metal sheets to make them cylinders or cones of different shapes.
When using the plate bending machine, the safety operation procedures must be strictly followed to ensure the personal safety of the operator and the normal operation of the equipment.
The following are the safety operation procedures and precautions for the plate bending machine:
1. Preparation before operation:
1.Before operating the bending machine, the operator must wear protective equipment, including hard hats, goggles, gloves, etc.
At the same time, it is necessary to ensure that the operating environment is well ventilated and free of debris and flammable and explosive materials.
2.Carry out daily inspection of the plate bending machine to ensure that all parts are running normally, the oil circuit is smooth, the circuit is intact, and there is no loosening.
2. Precautions during operation:
1.When operating the plate bending machine, it is strictly forbidden to wear loose clothing such as gloves and aprons to avoid being caught in the machine and causing accidental injury.
2.The operator should stand in a safe position, away from the roller and bending machine work area, to avoid the impact of the crimped sheet metal.
3.Ensure that the working surface of the bending machine is clean and tidy, and that the sheet metal will not be disturbed by the outside during the curling process, which may cause danger.
4.When the plate bending machine is working, it is strictly forbidden to repair and maintain inside the equipment, and maintenance work must be carried out in a shutdown state.
3. Emergency Handling:
1.If abnormal noise or peculiar smell is found in the plate bending machine during operation, it should be stopped immediately for inspection, and the operation can be continued only after troubleshooting.
2.In the event of an accident, the operator should immediately press the emergency stop button, and at the same time keep the scene on the spot, waiting for professional maintenance personnel to come to deal with it.
It can be seen that the safety operation procedures and precautions of the plate bending machine are very important.
Only by strictly abiding by the regulations and doing a good job in safety protection measures can we effectively prevent accidents and ensure the safety of equipment and personnel.
It is hoped that everyone can strictly implement the relevant safety regulations when using the plate bending machine and jointly create a safe working environment.