With the rapid development of 3D printing technology, 3D scanners have also attracted more and more attention. However, many people encounter some problems when using 3D scanners, such as how to set up the Chinese interface.
A 3D scanner is a high-tech product, usually using an English interface. It can be a little difficult to use for users who are not good at English. Therefore, the interface of the 3D scanner is set to Chinese, which can be operated and controlled more conveniently.
Different brands of 3D scanners are set up differently, but they can be broadly divided into two methods:
1. Through the software settings, some 3D scanners provide the option of software setting Chinese interface. The steps are as follows:
1) First of all** and install the software of the 3D scanner, then open the software.
2) Find options like "Settings" or "Options" in the software and select "Chinese (Chinese)" in the "Language" or "Language" options.
3) Save the settings and exit the software, reopen the software to see the Chinese interface.
2. Through the display settings of the device, some 3D scanners can set the Chinese interface through the display screen of the device. The steps are as follows:
1) Start by turning on the 3D scanner and press the "Menu" or "Menu" button on the display.
2) Find options such as "Settings" or "Options" in the menu, then select "Chinese (Chinese)" in the "Language" or "Language" options.
3) Save the settings and exit the menu, at this time the interface of the 3D scanner will change to Chinese.
Note: Different brands of 3D scanners may be set up differently, please refer to the corresponding instruction manual for setup.
When setting up the Chinese interface of the 3D scanner, you need to pay attention to the following points:
Interface translation: Due to translation quality issues, some 3D scanners may have some lexical and grammatical errors in the Chinese interface. Therefore, it is necessary to pay attention to these problems in use and feedback to the manufacturer for improvement in time.
Firmware version: Some 3D scanners need to upgrade the firmware to set up the Chinese interface. Therefore, before setting the Chinese interface, you need to confirm whether the firmware version of the device supports the Chinese interface.
Operating System Compatibility: Some 3D scanners' software may not support certain operating systems or require specific drivers. Therefore, when installing the 3D scanner software, you need to confirm whether the software is compatible with the operating system you are using, and install the driver correctly according to the manual.
The interface of the 3D scanner is set to Chinese, which can be operated and controlled more conveniently. The exact setup method varies from brand to brand, but can be broadly divided into two ways: through the software and through the device's display. When setting up the Chinese interface, you need to pay attention to issues such as interface translation, firmware version, operating system compatibility, and attention protection.