Imported high-temperature and high-pressure Y-type filter, also known as dirt remover and filter valve, is a kind of filtration device equipped with the pipeline system of the conveying medium, which is used to filter the mechanical impurities in the medium, which can filter rust, sand and a small amount of solid particles in the liquid in the sewage to protect the fittings on the equipment pipeline from wear and blockage, and can protect the normal operation of the equipment.
Imported high temperature and high pressure filter features:
The imported high-temperature and high-pressure filter is characterized by high filtration accuracy, strong anti-fouling ability, and good sewage discharge performance. The steam filter should be used without excessive pressure loss on the air flow. In addition, the steam filter also has the advantages of simple structure, small size, light weight, and is easy to install and use.
Generally speaking, the steam filters are made of stainless steel, which has a good service life and can filter steam, air, water, oil and other media. Steam filters also need to have a certain sterilization ability when used in special environments.
Working principle of imported high temperature and high pressure filter:
The imported high temperature and high pressure Y-type filter is Y-shaped, one end is to make the water and other fluids pass through, and the other end is to precipitate waste and impurities, usually it is installed at the inlet end of the pressure reducing valve, pressure relief valve, water level valve or other equipment, its function is to remove impurities in the water, and achieve the role of protecting the normal operation of the valve and equipment. The applicable medium of Y-type filter can be water, oil and gas. The general water network is 18 30 mesh, the gas network is 10 100 mesh, and the oil net is 100 480 mesh.
Main technical parameters of imported high temperature and high pressure filter:
Caliber: DN10 DN600
Pressure: 10 32MPa or class150 class2500
Temperature range: -20 350 ;-20～425℃；-20～600℃
Material: carbon steel, stainless steel, high temperature steel, etc.
Connection: thread, ferrule, welding, flange.
Filtration accuracy: 40 600 mesh or customized according to user needs.
Accessory: Can be equipped with a blowdown valve.
The imported high-temperature and high-pressure filter has the following characteristics:
1. The valve body of the steam filter is made of imported steel, which can withstand high temperature and high pressure steam and has a long service life
2. The strainer of the steam filter is made of double-layer stainless steel, which is wear-resistant and corrosion-resistant, and can be equipped with various mesh filters
3. The connection methods of steam filter include flange, wire mouth, welding and other forms to meet the installation requirements of various steam pipelines.
4. The steam filter has automatic sewage discharge or automatic backwashing structure, which is easy to use and maintain.