Compared with suspended air conditioners, although cylindrical air conditioners are much less difficult to clean, this does not mean that we can be too casual when cleaning. The basic cleaning process and sequence should also be understood. Otherwise, if it is not cleaned properly, it will cause stains to accumulate in the details.
Before cleaning begins, first place carpet or thicker bags on the floor around the air conditioner to reduce the penetration of dirty water into the tiles or wooden floors. Then, unplug the air conditioner and wrap the air conditioner plug in a dry cloth to prevent it from getting wet. After the previous work is done, we should follow the principle of "inside first and then outside", and first disassemble and clean the inner layer of the air conditioner.
1.Turn off the main power socket of the cylindrical air conditioner room unit, use a screwdriver to loosen the screws of the air conditioner, and remove the panel of the cabinet unit first.
2.Find the evaporator of the air conditioner and spray the special air conditioner cleaning agent evenly on the air conditioner evaporator, if there is heavy dirt and dirt on the evaporator fins.
3.Remove the small tube attached to the detergent bottle first, insert it into the nozzle, and spray it evenly back and forth from left to right.
4.On the surface of the aluminum heat transfer sheet and coil on the fins of the evaporator, ensure that the surface of the evaporator is completely covered by the cleaning foam, then cover the panel, let it stand for about 10 minutes, reinstall the dust filter after cleaning, and cover the air conditioner shell.
5.Then use a soft cloth dipped in warm water, gently wipe the air conditioner panel, do not use too much force, so as not to damage the coating on the panel, turn on the air conditioner and adjust the air volume and cooling to the maximum, and keep the air conditioner on for 20 minutes.
The above is the cleaning method of cylindrical air conditioner, I hope it can help you.