The use and operation of the submarine interlocking block mold mainly includes the following steps:
1.Mold preparation: According to the design requirements and specifications, select the appropriate subsea interlocking block mold, and clean and inspect it to ensure that the surface of the mold is clean and flat, and there is no damage or defects.
2.Mold installation: Place the mold on a flat workbench or subsea foundation, and use bolts or other fixtures to fix the mold as needed to ensure the stability of the mold.
3.Concrete preparation: According to the design formula and requirements, prepare the concrete material and mix it evenly to ensure that the concrete quality is excellent.
4.Concrete filling: Concrete is filled into a mold, and the concrete is compacted and air is expelled using a vibrator or other tool. The method of layered filling can be adopted, and each layer is filled with concrete using a vibrator for vibration and compaction.
5.Top surface leveling: After filling, use a trowel tool or trowel to level the top surface of the interlocking block to make it flat and meet the design requirements.
6.Concrete curing: According to the requirements of the concrete formulation, appropriate curing is carried out to ensure that the concrete can be fully solidified and hardened to improve the strength and stability of the seabed interlocking block.
7.Mould removal and maintenance: After the concrete curing is completed, according to the mold design and structure, disassemble the mold and take out the finished interlocking block. After the mold is removed, the mold is cleaned and maintained to prolong the service life of the mold.
When using subsea interlocking block molds, it is necessary to operate according to specific design requirements and actual conditions, and strictly adhere to relevant safety regulations and construction specifications. Especially when filling and vibrating concrete, it is necessary to pay attention to the safety and effect of the operation to ensure the consistency of filling quality and product quality.