As a new environmentally friendly curtain wall decoration material, aluminum veneer is popular because of its light material, excellent rigidity, and diverse colors and shapes. In particular, its excellent performance in terms of fire and flame retardancy, as well as the ease and speed of installation, enhance the aesthetics and practicality of the building.
Aluminum veneer curtain walls can be uneven when installed, but they can often be avoided if the correct process is followed. For novices who are installing aluminum veneer curtain walls for the first time, I recommend paying attention to the following five aspects to prevent uneven surfaces after installation:
1.Ensure that the purchased aluminum veneer products and the corresponding skeletons and accessories meet the product quality standards, and there is no bending or deformation.
2.When transporting and stacking aluminum veneers, it is necessary to ensure that the sheets lie flat to avoid stress and to prevent erosion by high temperatures and harmful substances.
3.When installing the aluminum veneer curtain wall, once it is found that there is a deviation in the size, it needs to be adjusted first, inserted in an orderly manner, and it is forbidden to use the method of forcible insertion to prevent deformation.
4.The installation of the keel needs to be flat, and the spacing error should be controlled within the allowable range.
5.Large lamps and exhaust fans cannot be directly placed on the flat top of the aluminum veneer, and a hanger should be set up. Reinforcement is required at the site where these devices are installed.
6.Dimension customization and shearing: Accurate dimension customization and shearing are carried out according to the design drawings and actual measurement results. This step is crucial, because a slight carelessness may lead to an increase in the assembly difficulty of the aluminum veneer, and even affect the overall effect.
7.Adjustment of hanging tabs, vertical frames and horizontal frames: During the installation process, attention should be paid to the adjustment of hanging tabs, vertical frames and horizontal frames, as they have a great impact on maintaining the flatness of the curtain wall. At the time of installation, if deviations are found, adjustments should be made immediately.
8.Ensure the quality and firmness of connection materials such as screws and bolts. A good connection can improve the stability of the aluminum veneer curtain wall and prevent the unevenness of the curtain wall caused by the loosening of the parts.
9.Multiple checksum checks: During installation, checksum checks should be performed multiple times. This includes, but is not limited to, dimensional verification, monitoring of installation quality, and prevention and response to possible problems.
10.Follow a standardized construction process: The construction process may vary slightly from project to project, but in general, the standard construction process should be followed. Choosing an experienced and professional construction team, while operating in accordance with the established construction sequence and steps, are the keys to ensuring the quality of aluminum veneer curtain wall installation.
During the installation process, it can be measured with a ruler or inspected by hand to ensure that the unevenness of the aluminum veneer curtain wall is avoided.