The water-cooled workshop cooling unit mainly reduces the temperature of the workshop through the cooling water circulation system. During the circulation, the cooling water absorbs the heat from the workshop, then transfers the heat to the condenser through the refrigerant, and then discharges the heat to the outside through the cooling fan. In this process, if all the components are operating normally, then the noise generated by the external machine should be relatively small.
However, if the water-cooled workshop cooling unit fails or is not properly maintained, it can lead to noise generation. For example, loose or unbalanced blades of a cooling fan, refrigerant leakage, clogging, etc., can all contribute to the generation of noise. In addition, if the external unit is installed outdoors and there are other noise sources around, such as traffic, construction, etc., it may also affect the noise level of the external unit.
In order to reduce the noise of the cooling outside unit in the water-cooled workshop, the following measures can be taken:
1.Regularly inspect and maintain the external unit to ensure that all components are functioning properly.
2.Make sure the blades of the cooling fan are tight and balanced to avoid unwanted vibrations.
3.Clean the cooling water circulation system regularly to prevent clogging and dirt accumulation.
4.If there are noise sources around, you can consider taking soundproof measures, such as installing soundproof windows, soundproof doors, etc.