Students, does the Hikvision ball machine have a function called automatic cruise?Auto cruise is to let the ball machine automatically rotate according to the preset path and speed, so as to cover a larger range. This way, you can use a single dome to monitor and shoot images from multiple angles, such as halls, corridors, doorways, etc. Let's take a look at the specific steps.
If your dome is connected to a Hikvision recorder, you can set up automatic cruise through the Hikvision recorder. The premise of setting up automatic cruise is to set the preset point first, and the preset point is the position that the dome can go to, and each position has a number, such as etc. Here's how to set a preset point:
In the main menu of the recorder, select Channel Management, and then select Gimbal Configuration.
Select the corresponding dome channel, and then use the gimbal arrow keys to turn the dome to the position you need to set.
In the Preset Point box, enter the number of the preset point, for example, 1, and then click Set to complete the setting of the preset point.
Repeat the above operations and enter different preset point numbers to set multiple preset points.
After setting the preset point, you can set the cruising path, the cruising path is the preset point that the dome machine rotates in order, and each cruising path has a number, such as etc. Here's how to set the cruise path:
In the main menu of the recorder, select Channel Management, and then select Gimbal Configuration.
Select the cruise path, and then tap Settings to enter the interface of the cruise settings.
Click Add Cruise Route, and then select the starting point of the cruise path on the map or camera preview screen.
According to the preset path instructions, all nodes of the cruising path are selected and marked step by step.
Set the cruise time and cruise speed for each node, the cruise time refers to the time spent on the preset point, and the cruise speed refers to the rotational speed from one preset point to another.
Click OK to complete the setting of the cruise path.
After setting the cruise path, you can call the cruise, and the method of calling the cruise is as follows:
In the main menu of the recorder, select Channel Management, and then select Gimbal Configuration.
Click Gimbal Control to enter the gimbal control interface.
Select the corresponding cruise path, and then click to invoke cruise, and the dome will start cruising automatically.
If you want to stop cruising, you can click to stop cruising, and the dome will stop spinning.
Through this article, we learned about the setting methods and skills of Hikvision ball machine automatic cruise, as well as precautions and common problems. We know that automatic cruise is a function that allows the ball machine to automatically rotate according to the preset path and speed, it can be used to monitor and shoot various scenes, the premise of setting automatic cruise is to set the preset point first, then set the cruise path, and finally call the cruise. Hope the above information is helpful to everyone!