1. Construction preparation.
Before the construction of the film structure of the coating film structure, sufficient construction preparation work is required. First of all, it is necessary to clean and level the construction site to ensure that the construction site is clean, flat and free of debris. Secondly, it is necessary to prepare the materials and tools required for construction, including coating film materials, support structures, connectors, fasteners, etc. At the same time, it is necessary to carry out technical disclosure and training for construction personnel to ensure that they are familiar with the construction process and operation methods.
Second, the construction of foundation engineering.
In the construction process of the film structure of the coating film structure, the foundation engineering is a very important part. First of all, foundation excavation and concrete pouring need to be carried out according to the design requirements to ensure that the foundation is stable and flat. After the foundation project is completed, it is necessary to carry out the maintenance and protection of the foundation to avoid damage to the foundation.
3. Installation of support structure.
The supporting structure is an important part of the film booth of the coating film structure, and its installation quality directly affects the safety and stability of the whole structure. When the supporting structure is installed, it needs to be installed according to the design requirements to ensure the stability and verticality of the supporting structure. At the same time, the support structure needs to be reinforced and protected to avoid damage.
Fourth, the installation of coating film materials.
The coating film material is an important part of the film booth of the coating film structure, and its installation quality directly affects the aesthetics and service life of the whole structure. When the coating film material is installed, it is necessary to install it according to the design requirements to ensure the flatness and aesthetics of the coating film material. At the same time, it is necessary to protect and maintain the coating film material to avoid damage to the coating film material.
5. Installation of connectors and fasteners.
Connectors and fasteners are an important part of the film booth of the coating film structure, and their installation quality directly affects the stability and safety of the whole structure. When installing connectors and fasteners, it is necessary to install them according to the design requirements to ensure the firmness and stability of the connectors and fasteners. At the same time, the connectors and fasteners need to be regularly inspected and maintained to avoid damage to the connectors and fasteners.
6. Construction acceptance.
After the construction of the film structure is completed, the construction acceptance needs to be carried out. First of all, the entire structure needs to be inspected and tested to ensure the safety and stability of the structure. Secondly, it is necessary to inspect and test the coating film material to ensure the flatness and aesthetics of the coating film material. Finally, the connectors and fasteners need to be inspected and tested to ensure their firmness and stability. After passing the acceptance, the follow-up use and maintenance work can be carried out.
In short, the construction of the film structure is a complex and important project, which needs to be constructed and maintained in strict accordance with the design requirements. During the construction process, attention to detail and quality control are required to ensure the stability and safety of the entire structure. At the same time, after the completion of the construction, a comprehensive inspection and acceptance work needs to be carried out to ensure that the quality and safety of the entire project meet the requirements.