The following steps can be referred to to the use of eco-friendly phenolic resins:
1.Prepare tools and materials, including phenolic resins, curing agents (accelerators), catalysts (accelerators), sandpaper, etc. Make sure the surface is clean and flat, free of impurities and water stains.
2.Spread out the clean fiberglass cloth and fix it to the substrate, taking care to compact it firmly. This enhances the strength and durability of the coating.
3.Use a brush or scraper to evenly apply the phenolic glue. When it is almost dry, the second layer can be applied until the required thickness is reached.
4.In the construction process, an appropriate amount of ripening elements can be added as needed, such as the amount of catalyst is too small, which will affect the surface drying speed;If the dosage is too much, it will cause the color to turn yellow and be easy to brittle after drying, so the amount of it should be strictly controlled.
5.Pay attention to the temperature and ventilation of the construction site, usually the temperature is maintained above 20, and the relative humidity is controlled at about 70%, which is conducive to reaction diffusion and improving the quality of hardening. It is also crucial to maintain good air permeability and free breathing (to avoid irritating gas entrapment).
6 .If you encounter problems, such as blistering, you can drain the water to cure, and then leave it indoors for a period of time, and the bubbles will disappear. Get the job done. The newly completed project should not be put into use immediately, and it should be maintained for a few days before the equipment can be officially operated. Please be sure to follow the operation specifications during use to ensure safety and use effect.
Hope this information is helpful to you!