According to the characteristics and specific construction methods of JS waterproof coatings. It is convenient for everyone to quickly understand the knowledge of JS waterproof coatings.
The main features of its products are as follows:
1.JS waterproof coating is a water-based coating.
2.The membrane has high tensile strength, good water resistance and weather resistance.
3.It can be applied on a wet foundation with strong adhesion.
4.The construction is cool, easy to operate, and is not limited by the moisture content of the substrate, which can shorten the construction period. The construction process is about the same. It mainly includes pre-construction preparations, such as paint configuration, ground cleaning, etc. Then there's getting started. Before applying the primer, we basically need to apply putty twice, which can make the floor more flat and ensure the flatness of the floor. Before painting,.
Finally, determine the number of paint brushes according to the paint conditions. The application time is determined according to the topcoat condition. Let's take a look at some of the key points in the construction process. Remind everyone to make all preparations before construction. For the treatment of substrates, the cleanliness and flatness of the substrate must be guaranteed. If it is not flat, it needs to be leveled, and the inner and outer corners of the substrate should be made into an arc. What needs to be done is to strictly follow the requirements, which mainly includes the proportion of ingredients and the order in which ingredients are added. These ingredients must be well mixed with the paint.
Once the primer and topcoat application instructions are ready, you'll need to apply them. Brushing your teeth is all about following a certain routine step by step. Each coat of paint must wait until the previous coat is completely dry before applying. And no matter which layer you apply, it's important to keep the brush you choose consistent, so you can keep the brush flowing without compromising the final result.
In addition to the above steps, the quality of a complete construction process must also be guaranteed. So after that, we need to do a quality check. In order to ensure the construction effect, every part of the project must be carefully inspected to ensure safety before the work can be completed. If some problems are found, try to fix them as soon as possible until they do not have any adverse effects on the construction results.