Title: Baojun 730 key disassembly tutorial.
As a family MPV, the Baojun 730 has won wide acclaim from consumers for its spacious space, comfortable driving experience and practical configuration. However, during daily use, we may encounter some problems with the Baojun 730 key, such as low battery, remote control failure, etc. At this point, we need to disassemble the key, replace the battery or repair the remote control. So, how to disassemble the key to the Baojun 730?This article will provide you with a detailed Baojun 730 key disassembly tutorial.
Tools required: A small screwdriver (magnetic screwdriver recommended).
A clean, soft cloth.
Step 1: Remove the key case.
Before disassembling the key, make sure your hands are dry to prevent electric shock.
Use a small screwdriver to gently pry open the side of the key, being careful not to use too much force to avoid damaging the parts inside the key.
Slowly pry open the case along the edge of the key case until it is completely detached from the key body. During this process, you can wrap the head of the screwdriver with a soft cloth to prevent scratching the key housing.
Step 2: Remove the key circuit board.
Before removing the key circuit board, turn off the power of the vehicle to ensure safety.
Use a small screwdriver to gently pry open the set screws on the key's circuit board to remove it.
Remove the key board, taking care not to use too much force to avoid damaging the components on the board.
Step 3: Replace the battery.
After removing the key circuit board, you can see where the battery is located. Usually, the Baojun 730 key uses a CR2032 type coin cell battery.
Use a small screwdriver to gently pry open the fixing clip on the battery holder to remove it.
Remove the old battery, being careful not to use too much force to avoid damaging the battery holder.
Place the new battery in the battery holder, making sure that the positive and negative poles of the battery are aligned with the logo on the battery holder.
Replace the battery holder with the key board and snap the fixing buckle back into place.
Step 4: Assemble the keys.
Replace the key board back into the key body, making sure that the connection between the board and the key body is aligned.
Tighten the set screws so that the key board is securely attached to the key body.
Replace the key housing with the key body, making sure that the connection between the housing and the key body is aligned.
Tighten the set screws of the housing so that the key housing is firmly fixed to the body of the key.
Through the above four steps, you can complete the disassembly of the Baojun 730 key and the replacement of the battery. When disassembling and replacing the battery, be sure to handle it with care to avoid damaging the parts inside the key. If you encounter problems during the dismantling process, it is recommended that you seek the help of a professional to avoid unnecessary losses.
In short, mastering the Baojun 730 key disassembly tutorial is very helpful to solve problems in daily use. Hopefully, this article has provided you with useful information and I wish you a pleasant use of the Baojun 730!