Centrifugal extractor is an efficient and stable separation technology, which is widely used in chemical, pharmaceutical, food and other fields. In order to ensure the normal operation and safe production of the centrifugal extractor, it is important to develop a set of scientific and reasonable operating procedures, which can help you achieve safe, efficient and stable separation results.
So, what is the operating procedure for centrifugal extractants?
1. Preparation.
Before you start operating the centrifugal manifold, make sure that you have completed the following preparations:
1) Check whether all parts of the equipment are in good condition, no damage or leakage;
2) Check whether the power supply and control system are normal;
3) Make sure the device is placed on a stable ground to avoid vibration or tilting;
4) Prepare the required raw materials and solvents, and pre-treat them according to the process requirements.
2. Steps.
Here are the steps to operate the centrifugal extractor:
1) Turn on the switch of the power supply and control system and start the device;
2) Add the material to be separated into the bowl of the centrifugal extractor, and add the appropriate solvent;
3) Set speed, temperature, time and other parameters according to process requirements
4) Start the centrifugal extractor and let it complete the separation process automatically
5) In the process of separation, monitor the operation status of the equipment, and deal with any abnormalities in time
6) After the separation is completed, turn off the equipment and take out the separated materials.
3. Safety precautions.
During the operation of the centrifugal extractor, the following safety precautions should be observed:
1) Ensure that the equipment is well grounded to avoid electric shock accidents;
2) Avoid maintenance or cleaning work during the operation of the equipment;
3) For flammable, explosive and toxic materials, corresponding safety measures should be taken;
4) During operation, wear corresponding protective equipment, such as masks, gloves, etc.
In order to ensure the long-term stable operation of the centrifugal extractor, regular maintenance and maintenance should be carried out: regularly inspect all parts of the equipment, such as bearings, seals, etc., to ensure that they are intact.
Recommended reading: What are the factors that affect extraction efficiency?
Article**:Centrifugal extractor operating procedures-Jiangsu Nuojiahai Technology***